lkml.org 
[lkml]   [2018]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] TTY/Serial patches for 4.21-rc1
The following changes since commit 40e020c129cfc991e8ab4736d2665351ffd1468d:

Linux 4.20-rc6 (2018-12-09 15:31:00 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-4.21-rc1

for you to fetch changes up to 598134ffcab5bfb1d342458732394487063e1b9e:

Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250" (2018-12-24 09:18:00 +0100)

----------------------------------------------------------------
TTY/Serial driver patches for 4.21-rc1

Here is the large TTY/Serial driver set of patches for 4.21-rc1.

A number of small serial driver changes along with some good tty core
fixes for long-reported issues with locking. There is also a new
console font added to the tree, for high-res screens, so that should be
helpful for many.

The last patch in the series is a revert of an older one in the tree, it
came late but it resolves a reported issue that linux-next was having
for some people.

Full details are in the shortlog, and all of these, with the exception
of the revert, have been in linux-next for a while with no reported
issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

----------------------------------------------------------------
Aisheng Dong (1):
dt-bindings: serial: lpuart: add imx8qxp compatible string

Alexander Shiyan (3):
serial: max310x: Fix tx_empty() callback
serial: sccnxp: Adds a delay between sequential read/write cycles
serial: sccnxp: Allow to use non-standard baud rates

Amanoel Dawod (1):
Fonts: New Terminus large console font

Anders Roxell (2):
serial: set suppress_bind_attrs flag only if builtin
writeback: don't decrement wb->refcnt if !wb->bdi

Andy Duan (2):
serial: fsl_lpuart: fix the typo: UARTCR1_PE -> UARTCTRL_PE
serial: fsl_lpuart: clear parity enable bit when disable parity

Beomho Seo (1):
tty: serial: samsung: Properly set flags in autoCTS mode

Colin Ian King (1):
serial-uartlite: fix null pointer dereference on pointer port

Darwin Dingel (2):
dt-bindings: serial: 8250: Add rate limit for serial port input overruns
serial: 8250: Rate limit serial port rx interrupts during input overruns

Dmitry Safonov (6):
tty/ldsem: Wake up readers after timed out down_write()
tty: Hold tty_ldisc_lock() during tty_reopen()
tty: Don't block on IO when ldisc change is pending
tty: Simplify tty->count math in tty_reopen()
tty/ldsem: Add lockdep asserts for ldisc_sem
tty/ldsem: Decrement wait_readers on timeouted down_read()

Douglas Anderson (6):
tty: serial: qcom_geni_serial: Don't slow all ports just for kgdb
serial: qcom_geni_serial: Finish supporting sysrq
serial: core: Allow processing sysrq at port unlock time
serial: qcom_geni_serial: Process sysrq at port unlock time
serial: core: Include console.h from serial_core.h
serial: 8250: Process sysrq at port unlock time

Fabrizio Castro (2):
dt-bindings: serial: sh-sci: Document r8a774a1 bindings
dt-bindings: serial: sh-sci: Document r8a774c0 bindings

Florian Fainelli (1):
serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250

Geert Uytterhoeven (4):
serial: sh-sci: Improve type-safety calling sci_receive_chars()
serial: sh-sci: Fix locking in sci_submit_rx()
serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure

Greg Kroah-Hartman (7):
Merge 4.20-rc2 into tty-next
Merge 4.20-rc4 into tty-next
Revert "serial/sunsu: add missing of_node_put()"
Revert "tty: xilinx_uartps: Correct return value in probe"
Revert "sysctl: clean up nr_pdflush_threads leftover"
Merge 4.20-rc6 into tty-next
Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250"

Johan Hovold (4):
serdev: use zero to indicate infinite write timeout
serdev: make synchronous write return bytes written
serdev: make synchronous write helper interruptible
serdev: document the write functions using kernel-doc

Long Cheng (2):
dt-bindings: dma: uart: add uart dma bindings
serial: 8250-mtk: add uart DMA support

Marcel Ziswiler (1):
serial: tegra: fix some spelling mistakes

Mark Tomlinson (1):
tty/sysrq: Do not call sync directly from sysrq_do_reset()

Matthias Kaehlcke (2):
sysrq: Use panic() to force a crash
tty: serial: qcom_geni_serial: Fix wrap around of TX buffer

Michal Simek (1):
serial: uartps: Fix error path when alloc failed

Miquel Raynal (2):
serial: mvebu-uart: clarify the baud rate derivation
serial: mvebu-uart: initialize over sampling stack register

Mukesh Kumar Savaliya (1):
tty: serial: qcom_geni_serial: Rectify UART suspend mechanism

Nava kishore Manne (1):
serial: uartps: Fix interrupt mask issue to handle the RX interrupts properly

Peter Korsgaard (1):
ttyprintk: make the printk log level configurable

Peter Zijlstra (1):
tty/ldsem: Convert to regular lockdep annotations

Rafael Aquini (1):
sysctl: clean up nr_pdflush_threads leftover

Rajan Vaja (1):
tty: xilinx_uartps: Correct return value in probe

Rob Herring (1):
tty: Use of_node_name_{eq,prefix} for node name comparisons

Ryan Case (3):
tty: serial: qcom_geni_serial: Fix softlock
tty: serial: qcom_geni_serial: Remove interrupt storm
tty: serial: qcom_geni_serial: Fix UART hang

Sergey Senozhatsky (1):
tty/serial: do not free trasnmit buffer page under port lock

Seung-Woo Kim (1):
tty: serial: samsung: Increase maximum baudrate

Shubhrajyoti Datta (7):
serial-uartlite: Move the uart register
serial-uartlite: Add get serial id if not provided
serial-uartlite: Do not use static struct uart_driver out of probe()
serial-uartlite: Add runtime support
serial-uartlite: Fix the unbind path
serial: uartps: Add the device_init_wakeup
serial: uartps: Check if the device is a console

Songjun Wu (11):
serial: lantiq: Get serial id from dts
serial: lantiq: Change ltq_w32_mask to asc_update_bits
serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32
serial: lantiq: Rename fpiclk to freqclk
serial: lantiq: Replace clk_enable/clk_disable with clk generic API
serial: lantiq: Add CCF support
serial: lantiq: Reorder the head files
serial: lantiq: Replace lantiq_soc.h with lantiq.h
serial: lantiq: Change init_lqasc to static declaration
dt-bindings: serial: lantiq: Add optional properties for CCF
include: Add lantiq.h in include/linux/

Stefan Agner (1):
serial: imx: fix error handling in console_setup

Wolfram Sang (1):
tty: serial: qcom_geni_serial: simplify getting .driver_data

Yangtao Li (3):
drivers/tty: add missing of_node_put()
serial/sunsu: add missing of_node_put()
tty/sysrq: add of_node_put()

zhong jiang (1):
pch_uart: remove set but not used variable 'tx_empty'

.../devicetree/bindings/dma/8250_mtk_dma.txt | 33 +
Documentation/devicetree/bindings/serial/8250.txt | 1 +
.../devicetree/bindings/serial/fsl-lpuart.txt | 2 +
.../devicetree/bindings/serial/lantiq_asc.txt | 15 +
.../bindings/serial/renesas,sci-serial.txt | 16 +-
drivers/char/Kconfig | 8 +
drivers/char/ttyprintk.c | 4 +-
drivers/gnss/serial.c | 2 +-
drivers/gnss/sirf.c | 2 +-
drivers/tty/hvc/hvc_opal.c | 2 +-
drivers/tty/hvc/hvc_vio.c | 11 +-
drivers/tty/n_hdlc.c | 4 +-
drivers/tty/n_r3964.c | 2 +-
drivers/tty/n_tty.c | 8 +-
drivers/tty/serdev/core.c | 70 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 6 +-
drivers/tty/serial/8250/8250_core.c | 25 +
drivers/tty/serial/8250/8250_fsl.c | 29 +-
drivers/tty/serial/8250/8250_mtk.c | 210 +-
drivers/tty/serial/8250/8250_of.c | 5 +
drivers/tty/serial/8250/8250_omap.c | 6 +-
drivers/tty/serial/8250/8250_port.c | 8 +-
drivers/tty/serial/amba-pl011.c | 2 +
drivers/tty/serial/fsl_lpuart.c | 6 +-
drivers/tty/serial/imx.c | 2 +-
drivers/tty/serial/lantiq.c | 145 +-
drivers/tty/serial/max310x.c | 7 +-
drivers/tty/serial/mvebu-uart.c | 29 +-
drivers/tty/serial/pch_uart.c | 3 -
drivers/tty/serial/pic32_uart.c | 1 +
drivers/tty/serial/pmac_zilog.c | 4 +-
drivers/tty/serial/qcom_geni_serial.c | 163 +-
drivers/tty/serial/samsung.c | 5 +-
drivers/tty/serial/sccnxp.c | 54 +-
drivers/tty/serial/serial-tegra.c | 10 +-
drivers/tty/serial/serial_core.c | 22 +-
drivers/tty/serial/sh-sci.c | 29 +-
drivers/tty/serial/suncore.c | 8 +-
drivers/tty/serial/sunsu.c | 4 +-
drivers/tty/serial/uartlite.c | 97 +-
drivers/tty/serial/xilinx_uartps.c | 17 +-
drivers/tty/sysrq.c | 18 +-
drivers/tty/tty_io.c | 14 +-
drivers/tty/tty_ldisc.c | 16 +
drivers/tty/tty_ldsem.c | 62 +-
include/linux/backing-dev-defs.h | 8 +
include/linux/font.h | 4 +-
include/linux/lantiq.h | 23 +
include/linux/serdev.h | 2 +-
include/linux/serial_8250.h | 4 +
include/linux/serial_core.h | 38 +-
include/linux/tty.h | 7 +
lib/fonts/Kconfig | 10 +
lib/fonts/Makefile | 1 +
lib/fonts/font_ter16x32.c | 2072 ++++++++++++++++++++
lib/fonts/fonts.c | 4 +
56 files changed, 3047 insertions(+), 313 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
create mode 100644 include/linux/lantiq.h
create mode 100644 lib/fonts/font_ter16x32.c

\
 
 \ /
  Last update: 2018-12-28 16:35    [W:0.043 / U:5.072 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site