lkml.org 
[lkml]   [2018]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 09/27] watchdog: jz4740: Avoid starting watchdog in set_timeout
Date
Previously the jz4740_wdt_set_timeout() function was starting the timer
unconditionally, even if it was stopped when that function was entered.

Now, the timer will be restarted only if it was already running before
this function is called.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---

Notes:
v6: New patch

v7: No change

v8: No change

v9: No change

drivers/watchdog/jz4740_wdt.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index 0f54306aee25..45d9495170e5 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -64,13 +64,15 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
{
struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
+ u32 tcer;

+ regmap_read(drvdata->map, TCU_REG_WDT_TCER, &tcer);
regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);

regmap_write(drvdata->map, TCU_REG_WDT_TDR, timeout_value);
regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);

- regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN);
+ regmap_write(drvdata->map, TCU_REG_WDT_TCER, tcer & TCU_WDT_TCER_TCEN);

wdt_dev->timeout = new_timeout;
return 0;
@@ -86,6 +88,7 @@ static int jz4740_wdt_start(struct watchdog_device *wdt_dev)
return ret;

jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+ regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN);

return 0;
}
--
2.11.0
\
 
 \ /
  Last update: 2018-12-27 19:17    [W:0.150 / U:10.908 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site