lkml.org 
[lkml]   [2018]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 09/97] ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
Date
From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit f15096f12a4e9340168df5fdd9201aa8ed60d59e ]

According to bindings/regulator/fixed-regulator.txt the 'clocks' and
'clock-names' properties are not valid ones.

In order to turn on the Wifi clock the correct location for describing
the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly.

Fixes: 56354959cfec ("ARM: dts: imx: add Boundary Devices Nitrogen7 board")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx7d-nitrogen7.dts | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index d8aac4a2d02a..177d21fdeb28 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -86,13 +86,17 @@
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
- clock-names = "slow";
regulator-name = "reg_wlan";
startup-delay-us = <70000>;
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ usdhc2_pwrseq: usdhc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "ext_clock";
+ };
};

&adc1 {
@@ -375,6 +379,7 @@
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wlan>;
+ mmc-pwrseq = <&usdhc2_pwrseq>;
cap-power-off-card;
keep-power-in-suspend;
status = "okay";
--
2.19.1
\
 
 \ /
  Last update: 2018-12-27 00:03    [W:0.446 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site