lkml.org 
[lkml]   [2018]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.14 01/59] pinctrl: meson: fix pull enable register calculation
Date
From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 614b1868a125a0ba24be08f3a7fa832ddcde6bca ]

We just changed the code so we apply bias disable on the correct
register but forgot to align the register calculation. The result
is that we apply the change on the correct register, but possibly
at the incorrect offset/bit

This went undetected because offsets tends to be the same between
REG_PULL and REG_PULLEN for a given pin the EE controller. This
is not true for the AO controller.

Fixes: e39f9dd8206a ("pinctrl: meson: fix pinconf bias disable")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/meson/pinctrl-meson.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 6c43322dbb97..2998941fdeca 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -272,7 +272,8 @@ static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
case PIN_CONFIG_BIAS_DISABLE:
dev_dbg(pc->dev, "pin %u: disable bias\n", pin);

- meson_calc_reg_and_bit(bank, pin, REG_PULL, &reg, &bit);
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN, &reg,
+ &bit);
ret = regmap_update_bits(pc->reg_pullen, reg,
BIT(bit), 0);
if (ret)
--
2.19.1
\
 
 \ /
  Last update: 2018-12-26 23:47    [W:0.241 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site