lkml.org 
[lkml]   [2018]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/14] spi: stm32: use explicit CPOL and CPHA mode bits
Date
From: Cezary Gapinski <cezary.gapinski@gmail.com>

Driver supports SPI mode 0 to 3 not only the mode 3.
Use SPI_CPOL and SPI_CPHA indicates that these bits
can be changed to obtain modes 0 - 3.

Signed-off-by: Cezary Gapinski <cezary.gapinski@gmail.com>
---
drivers/spi/spi-stm32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 8310f14..f7056b7 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1142,7 +1142,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
master->bus_num = pdev->id;
- master->mode_bits = SPI_MODE_3 | SPI_CS_HIGH | SPI_LSB_FIRST |
+ master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST |
SPI_3WIRE | SPI_LOOP;
master->bits_per_word_mask = stm32_spi_get_bpw_mask(spi);
master->max_speed_hz = spi->clk_rate / SPI_MBR_DIV_MIN;
--
2.7.4
\
 
 \ /
  Last update: 2018-12-24 23:03    [W:0.132 / U:13.732 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site