lkml.org 
[lkml]   [2018]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] treewide: remove explicit rules for *offsets.s
On Sun, Dec 23, 2018 at 7:32 PM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>
> These explicit rules are unneeded because scripts/Makefile.build
> provides a pattern rule to create %.s from %.c
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---

Series, applied to linux-kbuild.


> Kbuild | 9 +--------
> arch/arm/mach-at91/Makefile | 3 ---
> arch/arm/mach-omap2/Makefile | 3 ---
> arch/ia64/kernel/Makefile | 5 -----
> drivers/memory/Makefile.asm-offsets | 3 ---
> samples/bpf/Makefile | 3 ---
> 6 files changed, 1 insertion(+), 25 deletions(-)
>
> diff --git a/Kbuild b/Kbuild
> index 0053042..b24210c 100644
> --- a/Kbuild
> +++ b/Kbuild
> @@ -16,10 +16,6 @@ bounds-file := include/generated/bounds.h
> always := $(bounds-file)
> targets := kernel/bounds.s
>
> -# We use internal kbuild rules to avoid the "is up to date" message from make
> -kernel/bounds.s: kernel/bounds.c FORCE
> - $(call if_changed_dep,cc_s_c)
> -
> $(obj)/$(bounds-file): kernel/bounds.s FORCE
> $(call filechk,offsets,__LINUX_BOUNDS_H__)
>
> @@ -50,10 +46,7 @@ offsets-file := include/generated/asm-offsets.h
> always += $(offsets-file)
> targets += arch/$(SRCARCH)/kernel/asm-offsets.s
>
> -# We use internal kbuild rules to avoid the "is up to date" message from make
> -arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
> - $(obj)/$(timeconst-file) $(obj)/$(bounds-file) FORCE
> - $(call if_changed_dep,cc_s_c)
> +arch/$(SRCARCH)/kernel/asm-offsets.s: $(obj)/$(timeconst-file) $(obj)/$(bounds-file)
>
> $(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE
> $(call filechk,offsets,__ASM_OFFSETS_H__)
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 7415f18..f87066b 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -19,9 +19,6 @@ ifeq ($(CONFIG_PM_DEBUG),y)
> CFLAGS_pm.o += -DDEBUG
> endif
>
> -arch/arm/mach-at91/pm_data-offsets.s: arch/arm/mach-at91/pm_data-offsets.c
> - $(call if_changed_dep,cc_s_c)
> -
> include/generated/at91_pm_data-offsets.h: arch/arm/mach-at91/pm_data-offsets.s FORCE
> $(call filechk,offsets,__PM_DATA_OFFSETS_H__)
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 01377c2..55c482c 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -236,9 +236,6 @@ obj-y += omap_phy_internal.o
>
> obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
>
> -arch/arm/mach-omap2/pm-asm-offsets.s: arch/arm/mach-omap2/pm-asm-offsets.c
> - $(call if_changed_dep,cc_s_c)
> -
> include/generated/ti-pm-asm-offsets.h: arch/arm/mach-omap2/pm-asm-offsets.s FORCE
> $(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
>
> diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
> index d0c0ccd..7372d99 100644
> --- a/arch/ia64/kernel/Makefile
> +++ b/arch/ia64/kernel/Makefile
> @@ -50,10 +50,5 @@ CFLAGS_traps.o += -mfixed-range=f2-f5,f16-f31
> # The gate DSO image is built using a special linker script.
> include $(src)/Makefile.gate
>
> -# We use internal kbuild rules to avoid the "is up to date" message from make
> -arch/$(SRCARCH)/kernel/nr-irqs.s: arch/$(SRCARCH)/kernel/nr-irqs.c
> - $(Q)mkdir -p $(dir $@)
> - $(call if_changed_dep,cc_s_c)
> -
> include/generated/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s FORCE
> $(call filechk,offsets,__ASM_NR_IRQS_H__)
> diff --git a/drivers/memory/Makefile.asm-offsets b/drivers/memory/Makefile.asm-offsets
> index 843ff60..f968dfa 100644
> --- a/drivers/memory/Makefile.asm-offsets
> +++ b/drivers/memory/Makefile.asm-offsets
> @@ -1,5 +1,2 @@
> -drivers/memory/emif-asm-offsets.s: drivers/memory/emif-asm-offsets.c
> - $(call if_changed_dep,cc_s_c)
> -
> include/generated/ti-emif-asm-offsets.h: drivers/memory/emif-asm-offsets.s FORCE
> $(call filechk,offsets,__TI_EMIF_ASM_OFFSETS_H__)
> diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
> index be0a961..100a49d 100644
> --- a/samples/bpf/Makefile
> +++ b/samples/bpf/Makefile
> @@ -227,9 +227,6 @@ $(LIBBPF): FORCE
> # Fix up variables inherited from Kbuild that tools/ build system won't like
> $(MAKE) -C $(dir $@) RM='rm -rf' LDFLAGS= srctree=$(BPF_SAMPLES_PATH)/../../ O=
>
> -$(obj)/syscall_nrs.s: $(src)/syscall_nrs.c
> - $(call if_changed_dep,cc_s_c)
> -
> $(obj)/syscall_nrs.h: $(obj)/syscall_nrs.s FORCE
> $(call filechk,offsets,__SYSCALL_NRS_H__)
>
> --
> 2.7.4
>


--
Best Regards
Masahiro Yamada

\
 
 \ /
  Last update: 2018-12-24 16:20    [W:0.039 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site