lkml.org 
[lkml]   [2018]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
Date
Hi Marek,

On Fri, Dec 21, 2018 at 09:08:28PM +0100, Marek Vasut wrote:
> On 12/16/2018 11:28 PM, Paul Burton wrote:
> > On Sun, Dec 16, 2018 at 11:01:18PM +0100, Marek Vasut wrote:
> >>>>> I did suggest an alternative approach which would rename
> >>>>> serial8250_clear_fifos() and split it into 2 variants - one that
> >>>>> disables FIFOs & one that does not, then use the latter in
> >>>>> __do_stop_tx_rs485():
> >>>>>
> >>>>> https://lore.kernel.org/lkml/20181213014805.77u5dzydo23cm6fq@pburton-laptop/
> >>>>>
> >>>>> However I have no access to the OMAP3 hardware that Marek's patch was
> >>>>> attempting to fix & have heard nothing back with regards to him testing
> >>>>> that approach, so here's a simple revert that fixes the Ingenic JZ4780.
> >>>>>
> >>>>> I've marked for stable back to v4.10 presuming that this is how far the
> >>>>> broken patch may be backported, given that this is where commit
> >>>>> 2bed8a8e7072 ("Clearing FIFOs in RS485 emulation mode causes subsequent
> >>>>> transmits to break") that it tried to fix was introduced.
> >>>>
> >>>> OK, I tested this on AM335x / OMAP3 and the system is again broken, so
> >>>> that's a NAK.
> >>>
> >>> To be clear - what did you test? This revert or the patch linked to
> >>> above?
> >>>
> >>> This revert would of course reintroduce your RS485 issue because it just
> >>> undoes your change.
> >>
> >> The revert. Which of the two patches do you need me to test.
> >
> > The one in the email I sent on Thursday 13th at 01:48:06 UTC, linked to
> > at lore.kernel.org in the quote right above:
> >
> > https://lore.kernel.org/lkml/20181213014805.77u5dzydo23cm6fq@pburton-laptop/
> >
> > You replied with comments on the patch, you just never tested it or
> > never told me if you did. The lack of response means I don't know
> > whether that potential patch even still works for your system, hence the
> > revert.
>
> I shared the entire testcase, which now fails on AM335x due to this
> revert. Is there any progress on a proper fix from your side which does
> not break the AM335x ?

No.

Let's be clear - I didn't break your AM335x system, your broken patch
says that Daniel did with a commit applied back in v4.10. As such I
don't consider it my responsibility to fix your problem at all, I don't
have any access to the hardware anyway & I won't be buying hardware to
fix a bug for you.

Despite all that I did write a patch which I expect would have solved
the problem for both of us, which is linked *twice* in the quoted emails
above & which as far as I can tell you *still* have not tested. I can
only surmise that you're trying deliberately to be annoying at this
point.

If you want to try the patch I already wrote, and confirm whether it
actually works for you, then let's talk. Otherwise we're done here.

Thanks,
Paul

\
 
 \ /
  Last update: 2018-12-21 22:10    [W:0.121 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site