lkml.org 
[lkml]   [2018]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] cpufreq: qcom: Read voltage LUT and populate OPP
Date
Add support to read the voltage look up table and populate OPP for all
corresponding CPUS.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 32 ++++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index d83939a..7559b87 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -10,18 +10,21 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/pm_opp.h>
#include <linux/slab.h>

#define LUT_MAX_ENTRIES 40U
#define LUT_SRC GENMASK(31, 30)
#define LUT_L_VAL GENMASK(7, 0)
#define LUT_CORE_COUNT GENMASK(18, 16)
+#define LUT_VOLT GENMASK(11, 0)
#define LUT_ROW_SIZE 32
#define CLK_HW_DIV 2

/* Register offsets */
#define REG_ENABLE 0x0
-#define REG_LUT_TABLE 0x110
+#define REG_FREQ_LUT_TABLE 0x110
+#define REG_VOLT_LUT_TABLE 0x114
#define REG_PERF_STATE 0x920

static unsigned long cpu_hw_rate, xo_rate;
@@ -75,19 +78,26 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev,
void __iomem *base)
{
u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq;
+ u32 volt;
unsigned int max_cores = cpumask_weight(policy->cpus);
struct cpufreq_frequency_table *table;
+ unsigned long cpu_r;

table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
if (!table)
return -ENOMEM;

for (i = 0; i < LUT_MAX_ENTRIES; i++) {
- data = readl_relaxed(base + REG_LUT_TABLE + i * LUT_ROW_SIZE);
+ data = readl_relaxed(base + REG_FREQ_LUT_TABLE +
+ i * LUT_ROW_SIZE);
src = FIELD_GET(LUT_SRC, data);
lval = FIELD_GET(LUT_L_VAL, data);
core_count = FIELD_GET(LUT_CORE_COUNT, data);

+ data = readl_relaxed(base + REG_VOLT_LUT_TABLE +
+ i * LUT_ROW_SIZE);
+ volt = FIELD_GET(LUT_VOLT, data) * 1000;
+
if (src)
freq = xo_rate * lval / 1000;
else
@@ -123,6 +133,10 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev,

prev_cc = core_count;
prev_freq = freq;
+
+ freq *= 1000;
+ for_each_cpu(cpu_r, policy->cpus)
+ dev_pm_opp_add(get_cpu_device(cpu_r), freq, volt);
}

table[i].frequency = CPUFREQ_TABLE_END;
@@ -159,10 +173,18 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
struct device *dev = &global_pdev->dev;
struct of_phandle_args args;
struct device_node *cpu_np;
+ struct device *cpu_dev;
struct resource *res;
void __iomem *base;
int ret, index;

+ cpu_dev = get_cpu_device(policy->cpu);
+ if (!cpu_dev) {
+ pr_err("%s: failed to get cpu%d device\n", __func__,
+ policy->cpu);
+ return -ENODEV;
+ }
+
cpu_np = of_cpu_device_node_get(policy->cpu);
if (!cpu_np)
return -EINVAL;
@@ -205,6 +227,12 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
goto error;
}

+ ret = dev_pm_opp_get_opp_count(cpu_dev);
+ if (ret <= 0) {
+ dev_err(cpu_dev, "OPP table is not ready\n");
+ goto error;
+ }
+
policy->fast_switch_possible = true;

return 0;
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
\
 
 \ /
  Last update: 2018-12-21 19:08    [W:0.141 / U:3.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site