lkml.org 
[lkml]   [2018]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 2/2] mmc: sdhci: Moving sdhci_o2 into sdhci-pci-o2micro.c
From
Date
On 18/12/18 1:40 PM, Ernest Zhang(WH) wrote:
> Moving sdhci_o2 into sdhci-pci-o2micro.c
>
> Signed-off-by: Ernest Zhang <ernest.zhang@bayhubtech.com>

It would be more logical to make this the first patch, rather than put the
ops in one file, and then move them to another.

> ---
> Change in V2:
> 1. Moving sdhci_o2 into sdhci-pci-o2micro.c
>
> Change in V1:
> N/A
> ---
> drivers/mmc/host/sdhci-pci-core.c | 19 -------------------
> drivers/mmc/host/sdhci-pci-o2micro.c | 19 +++++++++++++++++++
> drivers/mmc/host/sdhci-pci.h | 1 +
> 3 files changed, 20 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index fc4f35653602..99b0fec2836b 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -1257,25 +1257,6 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
> }
> #endif
>
> -static const struct sdhci_ops sdhci_pci_o2_ops = {
> - .set_clock = sdhci_pci_o2_set_clock,
> - .enable_dma = sdhci_pci_enable_dma,
> - .set_bus_width = sdhci_set_bus_width,
> - .reset = sdhci_reset,
> - .set_uhs_signaling = sdhci_set_uhs_signaling,
> -};
> -
> -static const struct sdhci_pci_fixes sdhci_o2 = {
> - .probe = sdhci_pci_o2_probe,
> - .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> - .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
> - .probe_slot = sdhci_pci_o2_probe_slot,
> -#ifdef CONFIG_PM_SLEEP
> - .resume = sdhci_pci_o2_resume,
> -#endif
> - .ops = &sdhci_pci_o2_ops,
> -};
> -
> static const struct sdhci_pci_fixes sdhci_jmicron = {
> .probe = jmicron_probe,
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 506b93e5dcd8..7f11cee71db1 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -665,3 +665,22 @@ int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
> return sdhci_pci_resume_host(chip);
> }
> #endif
> +
> +static const struct sdhci_ops sdhci_pci_o2_ops = {
> + .set_clock = sdhci_pci_o2_set_clock,
> + .enable_dma = sdhci_pci_enable_dma,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> +};
> +
> +const struct sdhci_pci_fixes sdhci_o2 = {
> + .probe = sdhci_pci_o2_probe,
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> + .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
> + .probe_slot = sdhci_pci_o2_probe_slot,
> +#ifdef CONFIG_PM_SLEEP
> + .resume = sdhci_pci_o2_resume,
> +#endif
> + .ops = &sdhci_pci_o2_ops,
> +};
> diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
> index e41a85f0b40a..0e08021179a8 100644
> --- a/drivers/mmc/host/sdhci-pci.h
> +++ b/drivers/mmc/host/sdhci-pci.h
> @@ -188,5 +188,6 @@ void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock);
>
> extern const struct sdhci_pci_fixes sdhci_arasan;
> extern const struct sdhci_pci_fixes sdhci_snps;
> +extern const struct sdhci_pci_fixes sdhci_o2;

Then the other o2 declarations in sdhci-pci.h are not needed.
i.e. these ones:
int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot);
int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip);
#ifdef CONFIG_PM_SLEEP
int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip);
#endif
void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock);

>
> #endif /* __SDHCI_PCI_H */
>

\
 
 \ /
  Last update: 2018-12-21 14:32    [W:0.068 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site