lkml.org 
[lkml]   [2018]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] spi: Add Renesas R-Car Gen3 RPC SPI controller driver
From
Date
Hello!

On 12/21/2018 04:30 AM, masonccyang@mxic.com.tw wrote:

>> > diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
>> > new file mode 100644
>> > index 0000000..cec5669
>> > --- /dev/null
>> > +++ b/drivers/spi/spi-renesas-rpc.c
>> > @@ -0,0 +1,776 @@
>> [...]
>> > +static const struct soc_device_attribute r8a7795es1[] __initconst = {
>>
>> This __initconst shouldn't be there, it causes a build warning.
>>
>> > + { .soc_id = "r8a7795", .revision = "ES1.*" },
>>
>> Wait, the driver doesn't really probe on R8A7795 yet!
>
> yup, this is for RPC_PHYCNT_STRTIM setting by Marek's comments.
>
> On H3 ES1.x, the value should be 0, while on others, the value should be 6.
>
> ES1.x is r8a7795.

Why care if we don't support H3 yet? Add this when the R8A77950 support is added.

>> > + { /* sentinel */ }
>> > +};
>> > +
>> > +static void rpc_spi_hw_init(struct rpc_spi *rpc)
>> > +{
>> > + int strtim;
>> > + /*
>> > + * NOTE: The 0x260 are undocumented bits, but they must be set.
>> > + * RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
>> > + * 0x0 : the delay is biggest,
>> > + * 0x1 : the delay is 2nd biggest,
>> > + * On H3 ES1.x, the value should be 0, while on others,
>> > + * the value should be 6.
>> > + */
>> > + if (soc_device_match(r8a7795es1))
>> > + strtim = 0;
>> > + else
>> > + strtim = 6;
>> [...]
>> > +static const struct of_device_id rpc_spi_of_ids[] = {
>> > + { .compatible = "renesas,r8a77995-rpc", },
>>
>> We only support R8A77995 now.
>
> see above !

There's difference between R8A77995 and R8A77950, right?

[...]
> thanks & best regards,
> Mason

MBR, Sergei

\
 
 \ /
  Last update: 2018-12-21 11:23    [W:0.099 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site