lkml.org 
[lkml]   [2018]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] leds: lp5024: Add the LP5024/18 RGB LED driver
From
Date
Pavel

Thanks for the review.

On 12/19/2018 01:34 PM, Pavel Machek wrote:
> Hi!
>
>> +static DEVICE_ATTR_WO(ctrl_bank_a_mix);
>> +static DEVICE_ATTR_WO(ctrl_bank_b_mix);
>> +static DEVICE_ATTR_WO(ctrl_bank_c_mix);
>> +
>> +static struct attribute *lp5024_ctrl_bank_attrs[] = {
>> + &dev_attr_ctrl_bank_a_mix.attr,
>> + &dev_attr_ctrl_bank_b_mix.attr,
>> + &dev_attr_ctrl_bank_c_mix.attr,
>> + NULL
>> +};
>> +ATTRIBUTE_GROUPS(lp5024_ctrl_bank);
>
> ...
>> +
>> +static DEVICE_ATTR_WO(led1_mix);
>> +static DEVICE_ATTR_WO(led2_mix);
>> +static DEVICE_ATTR_WO(led3_mix);
>> +
>> +static struct attribute *lp5024_led_independent_attrs[] = {
>> + &dev_attr_led1_mix.attr,
>> + &dev_attr_led2_mix.attr,
>> + &dev_attr_led3_mix.attr,
>> + NULL
>> +};
>> +ATTRIBUTE_GROUPS(lp5024_led_independent);
>
> Ok, so you are adding new sysfs files. Are they _really_ neccessary?
> We'd like to have uniform interfaces for the leds.

Yes I am adding these for this driver.
They adjust the individual brightness of each LED connected (what the HW guys called mixing).

The standard brightness sysfs adjusts all 3 LEDs simultaneously so that all 3 LEDs brightness are
uniform.

I did not think these belonged in the dt as they should be user space configurable

>
> If they are neccessary, we need documentation for them.

Sure I have no problem documenting them but where do I do that?
I am assuming Documentation/leds/leds-lp5024.txt

This looks to be where Milo did this before.

Dan

>
> Thanks,
> Pavel
>


--
------------------
Dan Murphy

\
 
 \ /
  Last update: 2018-12-19 20:41    [W:0.332 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site