lkml.org 
[lkml]   [2018]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3] dt-bindings: timer: gpt: update binding doc
Date
The i.MX GPT timer driver binding doc is out of date,
update it according to current GPT timer driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/timer/fsl,imxgpt.txt | 35 ++++++++++++++++++----
1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
index 9809b11..a7f23a6 100644
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
@@ -2,17 +2,40 @@ Freescale i.MX General Purpose Timer (GPT)

Required properties:

-- compatible : should be "fsl,<soc>-gpt"
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupts; one per timer channel.
-- clocks : The clocks provided by the SoC to drive the timer.
+- compatible : should be one of following:
+
+ should be "fsl,imx1-gpt" for i.MX1;
+
+ should be one of following for i.MX21/i.MX27:
+ - "fsl,imx21-gpt",
+ - "fsl,imx27-gpt",
+
+ should be one of following for i.MX31/i.MX25/i.MX50/i.MX51/i.MX53/i.MX6Q:
+ - "fsl,imx31-gpt",
+ - "fsl,imx25-gpt",
+ - "fsl,imx50-gpt",
+ - "fsl,imx51-gpt",
+ - "fsl,imx53-gpt",
+ - "fsl,imx6q-gpt",
+
+ should be one of following for i.MX6DL/i.MX6SL/i.MX6SX:
+ - "fsl,imx6dl-gpt",
+ - "fsl,imx6sl-gpt",
+ - "fsl,imx6sx-gpt".
+
+- reg : specifies base physical address and size of the registers.
+- interrupts : should be the gpt interrupt.
+- clocks : the clocks provided by the SoC to drive the timer, must contain
+ an entry for each entry in clock-names.
+- clock-names : must include "ipg" entry first, then "per" entry.

Example:

gpt1: timer@10003000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
- clocks = <&clks 46>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
--
2.7.4
\
 
 \ /
  Last update: 2018-12-19 08:09    [W:0.051 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site