lkml.org 
[lkml]   [2018]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt: bindings: lp5024: Introduce the lp5024 and lp5018 RGB driver
Date
Introduce the bindings for the Texas Instruments LP5024 and the LP5018
RGB LED device driver. The LP5024/18 can control RGB LEDs individually
or as part of a control bank group. These devices have the ability
to adjust the mixing control for the RGB LEDs to obtain different colors
independent of the overall brightness of the LED grouping.

Datasheet:
http://www.ti.com/lit/ds/symlink/lp5024.pdf

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../devicetree/bindings/leds/leds-lp5024.txt | 63 +++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-lp5024.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-lp5024.txt b/Documentation/devicetree/bindings/leds/leds-lp5024.txt
new file mode 100644
index 000000000000..9567aa6f7813
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp5024.txt
@@ -0,0 +1,63 @@
+* Texas Instruments - LP5024/18 RGB LED driver
+
+The LM3692x is an ultra-compact, highly efficient,
+white-LED driver designed for LCD display backlighting.
+
+The main difference between the LP5024 and L5018 is the number of
+RGB LEDs they support. The LP5024 supports twenty four strings while the
+LP5018 supports eighteen strings.
+
+Required properties:
+ - compatible:
+ "ti,lp5018"
+ "ti,lp5024"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Optional properties:
+ - enable-gpios : gpio pin to enable/disable the device.
+ - vled-supply : LED supply
+
+Required child properties:
+ - reg : Is the child node iteration.
+ - led-sources : LP5024 - 0 - 7
+ LP5018 - 0 - 5
+ Declares the LED string or strings that the child node
+ will control. If ti,control-bank is set then this
+ property will contain multiple LED IDs.
+
+Optional child properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+ - ti,control-bank : Indicates that the LED strings declared in the
+ led-sources property are grouped within a control
+ bank for brightness and mixing control.
+
+Example:
+
+led-controller@28 {
+ compatible = "ti,lp5024";
+ reg = <0x28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <1>;
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <0 6>;
+ ti,control-bank;
+ };
+
+}
+
+For more product information please see the link below:
+http://www.ti.com/lit/ds/symlink/lp5024.pdf
--
2.20.0.rc2.7.g965798d1f2
\
 
 \ /
  Last update: 2018-12-19 17:27    [W:0.193 / U:2.928 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site