lkml.org 
[lkml]   [2018]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845
From
Date
Hi Sravanthi,

Thanks for the patch!

On 11/22/18 11:06, Sravanthi Kollukuduru wrote:
> Add interconnect properties such as interconnect provider specifier
> , the edge source and destination ports which are required by the
> interconnect API to configure interconnect path for MDSS.
>
> Changes in v2:
> - none
>
> Changes in v3:
> - Remove common property definitions (Rob Herring)
>
> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
> ---
> Documentation/devicetree/bindings/display/msm/dpu.txt | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index ad2e8830324e..d75b4360a4be 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -28,6 +28,11 @@ Required properties:
> - #address-cells: number of address cells for the MDSS children. Should be 1.
> - #size-cells: Should be 1.
> - ranges: parent bus address space is the same as the child bus address space.
> +- interconnects : interconnect path specifier for MDSS according to
> + Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be
> + 2 paths corresponding to 2 AXI ports.
> +- interconnect-names : MDSS will have 2 port names to differentiate between the
> + 2 interconnect paths defined with interconnect specifier.
>
> Optional properties:
> - assigned-clocks: list of clock specifiers for clocks needing rate assignment
> @@ -86,6 +91,10 @@ Example:
> interrupt-controller;
> #interrupt-cells = <1>;
>
> + interconnects = <&qnoc 38 &qnoc 512>,
> + <&qnoc 39 &qnoc 512>;

Please use string names instead of hard-coded integers.

interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>,
<&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>;

> + interconnect-names = "port0", "port1";

We are trying to be more descriptive and include both the source and the
destination like: "mdp0-mem", "mdp1-mem"

> +
> iommus = <&apps_iommu 0>;
>
> #address-cells = <2>;

Otherwise looks good.

Thanks,
Georgi

\
 
 \ /
  Last update: 2018-12-19 15:45    [W:0.069 / U:1.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site