lkml.org 
[lkml]   [2018]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 0/6] media/sun6i: Allwinner A64 CSI support
Hi Maxime

On Wed, Dec 19, 2018 at 11:25 AM Maxime Ripard
<maxime.ripard@bootlin.com> wrote:
>
> On Tue, Dec 18, 2018 at 08:58:22PM +0530, Jagan Teki wrote:
> > On Tue, Dec 18, 2018 at 8:51 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > >
> > > On Tue, Dec 18, 2018 at 05:03:14PM +0530, Jagan Teki wrote:
> > > > This series support CSI on Allwinner A64.
> > > >
> > > > Tested 640x480, 320x240, 720p, 1080p resolutions UYVY8_2X8 format.
> > > >
> > > > Changes for v4:
> > > > - update the compatible string order
> > > > - add proper commit message
> > > > - included BPI-M64 patch
> > > > - skipped amarula-a64 patch
> > > > Changes for v3:
> > > > - update dt-bindings for A64
> > > > - set mod clock via csi driver
> > > > - remove assign clocks from dtsi
> > > > - remove i2c-gpio opendrian
> > > > - fix avdd and dovdd supplies
> > > > - remove vcc-csi pin group supply
> > > >
> > > > Note: This series created on top of H3 changes [1]
> > > >
> > > > [1] https://patchwork.kernel.org/cover/10705905/
> > >
> > > You had memory corruption before, how was this fixed?
> >
> > Memory corruption observed with default 600MHz on 1080p. It worked
> > fine on BPI-M64 (with 300MHz)
>
> I don't get it. In the previous version of those patches, you were
> mentionning you were still having this issue, even though you had the
> clock running at 300MHz, and then you tried to convince us to merge
> the patches nonetheless.
>
> Why would you say that then if that issue was fixed?

It's simple, we have a full working platform with ov5640 that support
all the resolutions, that can be test by anyone and
we have an industrial product that has some problem on high xvclk
because it can not give us a clear image but this is limited on
another design and another camera module vendor. Problem is not in the
kernel code but it's just on relic design. We are getting
the information on that module and see if inside is really using the
xvclk or it's clocked by some other things. We have only the schematic
up to the connector.

Michael

>
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com



--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |

\
 
 \ /
  Last update: 2018-12-19 11:33    [W:3.343 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site