lkml.org 
[lkml]   [2018]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V1] mmc: cqhci: DMA Configuration prior to CQE
From
Date
On 14/12/18 8:21 PM, Sowjanya Komatineni wrote:
> eMMC-5.1 JESD85-B51 Spec (Section 6.6.39), mentions DMA selection

There is no JESD85-B51. I presume you mean JESD84-B51, but I can't find any
reference to DMA in 6.6.39. All the host controller relevant material seems
to be in Annex B. Can you clarify this reference?

> and DMA Block size configuration on SDHCI Host need to be done
> prior to enabling Command Queue Engine.
>
> This patch fixes the sequence to follow the spec.
>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
> drivers/mmc/host/cqhci.c | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/cqhci.c b/drivers/mmc/host/cqhci.c
> index 159270e947cf..f701342e7212 100644
> --- a/drivers/mmc/host/cqhci.c
> +++ b/drivers/mmc/host/cqhci.c
> @@ -248,6 +248,9 @@ static void __cqhci_enable(struct cqhci_host *cq_host)
> cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
> }
>
> + if (cq_host->ops->enable)
> + cq_host->ops->enable(mmc);
> +
> cqcfg &= ~(CQHCI_DCMD | CQHCI_TASK_DESC_SZ);
>
> if (mmc->caps2 & MMC_CAP2_CQE_DCMD)
> @@ -273,9 +276,6 @@ static void __cqhci_enable(struct cqhci_host *cq_host)
>
> mmc->cqe_on = true;
>
> - if (cq_host->ops->enable)
> - cq_host->ops->enable(mmc);
> -
> /* Ensure all writes are done before interrupts are enabled */
> wmb();
>
> @@ -561,6 +561,7 @@ static int cqhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> int tag = cqhci_tag(mrq);
> struct cqhci_host *cq_host = mmc->cqe_private;
> unsigned long flags;
> + u32 cqcfg = 0;
>
> if (!cq_host->enabled) {
> pr_err("%s: cqhci: not enabled\n", mmc_hostname(mmc));
> @@ -579,8 +580,19 @@ static int cqhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> pr_err("%s: cqhci: CQE failed to exit halt state\n",
> mmc_hostname(mmc));
> }
> + /* Configuration must not be changed while enabled */
> + cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
> + if (cqcfg & CQHCI_ENABLE) {
> + cqcfg &= ~CQHCI_ENABLE;
> + cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
> + }
> +
> if (cq_host->ops->enable)
> cq_host->ops->enable(mmc);
> +
> + cqcfg |= CQHCI_ENABLE;
> + cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
> +
> }
>
> if (mrq->data) {
>

\
 
 \ /
  Last update: 2018-12-19 10:06    [W:0.047 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site