lkml.org 
[lkml]   [2018]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH v4 0/5] add PM functionality for act8945a PMIC
    Date
    Hi Mark,

    I saw that previous version of this series was applied to your tree just
    after I've send this new one. The only difference b/w them is in the
    documentation patch where I moved the new header. No functionality change.

    Sorry for the noise,
    Claudiu Beznea

    On 13.12.2018 14:49, Claudiu Beznea - M18063 wrote:
    > From: Claudiu Beznea <claudiu.beznea@microchip.com>
    >
    > This series implements PM functionality for act8945a PMIC and use that support
    > on SAMA5D2 Xplained board.
    >
    > Changes in v4:
    > - move dt-bindings/regulator/active-semi,8945a-regulator.h in documentation
    > patch; driver uses macros included in this file; due to this documentation
    > patch and drivers patches should go through the same tree
    > - make documentation patch, patch 2 of this series
    >
    > Changes in v3:
    > - add patch "unlock expert registers"; it was wrongly missed in previous version
    >
    > Changes in v2:
    > - split patch 1/1 from previous series in 3 patches: one adding regmap,
    > one adding pm functionality, one adding shutdown functionality
    > - use dev_pm_ops suspend function to set register specific to PWRHLD line: this
    > is specific to PMIC itself and not to regulators
    > - add mode support for LDOs
    > - add constants for mode in dt-bindings/regulator/active-semi,8945a-regulator.h
    > - document modes and regulator suspend states
    > - remove rdevs from struct act8945a_pmic since were not used anywhere
    > - add op_mode field in struct act8945a_pmic, update it when setting mode and
    > return it when reading mode (avoiding one extra register read while
    > reading mode)
    > - add a patch to fix a checkpatch.pl warning
    > - in shutdown function use directly act8945a->regmap instead of an intermediary
    > struct regmap variable
    >
    > Boris Brezillon (2):
    > regulator: act8945a-regulator: Implement PM functionalities
    > ARM: dts: at91: sama5d2_xplained: Add proper regulator states for
    > suspend-to-mem
    >
    > Claudiu Beznea (3):
    > regulator: act8945a-regulator: fix line over 80 chars warning
    > regulator: act8945a-regulator: add shutdown function
    > regulator: add documentation for regulator modes and suspend states
    >
    > .../bindings/regulator/act8945a-regulator.txt | 34 ++++
    > arch/arm/boot/dts/at91-sama5d2_xplained.dts | 54 ++++++
    > drivers/regulator/act8945a-regulator.c | 200 ++++++++++++++++++++-
    > .../regulator/active-semi,8945a-regulator.h | 30 ++++
    > 4 files changed, 312 insertions(+), 6 deletions(-)
    > create mode 100644 include/dt-bindings/regulator/active-semi,8945a-regulator.h
    >
    \
     
     \ /
      Last update: 2018-12-13 14:00    [W:6.154 / U:3.168 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site