lkml.org 
[lkml]   [2018]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectApplied "regulator: act8945a-regulator: Implement PM functionalities" to the regulator tree
Date
The patch

regulator: act8945a-regulator: Implement PM functionalities

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 7482d6ecc68e16a2b8272b0c9cbcc5c50edf013f Mon Sep 17 00:00:00 2001
From: Boris Brezillon <boris.brezillon@bootlin.com>
Date: Tue, 11 Dec 2018 15:56:41 +0000
Subject: [PATCH] regulator: act8945a-regulator: Implement PM functionalities

The regulator supports a dedicated suspend mode.
Implement the appropriate ->set_suspend_xx() hooks, add support for
->set_mode(), and provide basic PM ops functionalities to setup the
regulator in a suspend state when the system is entering suspend.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
[claudiu.beznea@microchip.com: remove shutdown function, use dev_pm_ops,
fix checkpatch warning, adapt commit message, add LDO modes support,
move modes constants to active-semi,8945a-regulator.h, remove rdevs from
struct act8945a_pmic, add op_mode to act8945a_pmic]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/act8945a-regulator.c | 186 +++++++++++++++++-
.../regulator/active-semi,8945a-regulator.h | 30 +++
2 files changed, 211 insertions(+), 5 deletions(-)
create mode 100644 include/dt-bindings/regulator/active-semi,8945a-regulator.h

diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 8d71d9893d0d..f37d1a860407 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -18,6 +18,7 @@
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>

/**
* ACT8945A Global Register Map.
@@ -28,20 +29,27 @@
#define ACT8945A_DCDC1_VSET1 0x20
#define ACT8945A_DCDC1_VSET2 0x21
#define ACT8945A_DCDC1_CTRL 0x22
+#define ACT8945A_DCDC1_SUS 0x24
#define ACT8945A_DCDC2_VSET1 0x30
#define ACT8945A_DCDC2_VSET2 0x31
#define ACT8945A_DCDC2_CTRL 0x32
+#define ACT8945A_DCDC2_SUS 0x34
#define ACT8945A_DCDC3_VSET1 0x40
#define ACT8945A_DCDC3_VSET2 0x41
#define ACT8945A_DCDC3_CTRL 0x42
+#define ACT8945A_DCDC3_SUS 0x44
#define ACT8945A_LDO1_VSET 0x50
#define ACT8945A_LDO1_CTRL 0x51
+#define ACT8945A_LDO1_SUS 0x52
#define ACT8945A_LDO2_VSET 0x54
#define ACT8945A_LDO2_CTRL 0x55
+#define ACT8945A_LDO2_SUS 0x56
#define ACT8945A_LDO3_VSET 0x60
#define ACT8945A_LDO3_CTRL 0x61
+#define ACT8945A_LDO3_SUS 0x62
#define ACT8945A_LDO4_VSET 0x64
#define ACT8945A_LDO4_CTRL 0x65
+#define ACT8945A_LDO4_SUS 0x66

/**
* Field Definitions.
@@ -62,7 +70,12 @@ enum {
ACT8945A_ID_LDO2,
ACT8945A_ID_LDO3,
ACT8945A_ID_LDO4,
- ACT8945A_REG_NUM,
+ ACT8945A_ID_MAX,
+};
+
+struct act8945a_pmic {
+ struct regmap *regmap;
+ u32 op_mode[ACT8945A_ID_MAX];
};

static const struct regulator_linear_range act8945a_voltage_ranges[] = {
@@ -71,6 +84,143 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
};

+static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id, reg, val;
+
+ switch (id) {
+ case ACT8945A_ID_DCDC1:
+ reg = ACT8945A_DCDC1_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_DCDC2:
+ reg = ACT8945A_DCDC2_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_DCDC3:
+ reg = ACT8945A_DCDC3_SUS;
+ val = 0xa8;
+ break;
+ case ACT8945A_ID_LDO1:
+ reg = ACT8945A_LDO1_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO2:
+ reg = ACT8945A_LDO2_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO3:
+ reg = ACT8945A_LDO3_SUS;
+ val = 0xe8;
+ break;
+ case ACT8945A_ID_LDO4:
+ reg = ACT8945A_LDO4_SUS;
+ val = 0xe8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (enable)
+ val |= BIT(4);
+
+ /*
+ * Ask the PMIC to enable/disable this output when entering hibernate
+ * mode.
+ */
+ return regmap_write(regmap, reg, val);
+}
+
+static int act8945a_set_suspend_enable(struct regulator_dev *rdev)
+{
+ return act8945a_set_suspend_state(rdev, true);
+}
+
+static int act8945a_set_suspend_disable(struct regulator_dev *rdev)
+{
+ return act8945a_set_suspend_state(rdev, false);
+}
+
+static unsigned int act8945a_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case ACT8945A_REGULATOR_MODE_FIXED:
+ case ACT8945A_REGULATOR_MODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ case ACT8945A_REGULATOR_MODE_LOWPOWER:
+ return REGULATOR_MODE_STANDBY;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id;
+ int reg, ret, val = 0;
+
+ switch (id) {
+ case ACT8945A_ID_DCDC1:
+ reg = ACT8945A_DCDC1_CTRL;
+ break;
+ case ACT8945A_ID_DCDC2:
+ reg = ACT8945A_DCDC2_CTRL;
+ break;
+ case ACT8945A_ID_DCDC3:
+ reg = ACT8945A_DCDC3_CTRL;
+ break;
+ case ACT8945A_ID_LDO1:
+ reg = ACT8945A_LDO1_SUS;
+ break;
+ case ACT8945A_ID_LDO2:
+ reg = ACT8945A_LDO2_SUS;
+ break;
+ case ACT8945A_ID_LDO3:
+ reg = ACT8945A_LDO3_SUS;
+ break;
+ case ACT8945A_ID_LDO4:
+ reg = ACT8945A_LDO4_SUS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case REGULATOR_MODE_STANDBY:
+ if (rdev->desc->id > ACT8945A_ID_DCDC3)
+ val = BIT(5);
+ break;
+ case REGULATOR_MODE_NORMAL:
+ if (rdev->desc->id <= ACT8945A_ID_DCDC3)
+ val = BIT(5);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(regmap, reg, BIT(5), val);
+ if (ret)
+ return ret;
+
+ act8945a->op_mode[id] = mode;
+
+ return 0;
+}
+
+static unsigned int act8945a_get_mode(struct regulator_dev *rdev)
+{
+ struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id;
+
+ if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX)
+ return -EINVAL;
+
+ return act8945a->op_mode[id];
+}
+
static const struct regulator_ops act8945a_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
@@ -78,7 +228,11 @@ static const struct regulator_ops act8945a_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8945a_set_mode,
+ .get_mode = act8945a_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8945a_set_suspend_enable,
+ .set_suspend_disable = act8945a_set_suspend_disable,
};

#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \
@@ -86,6 +240,7 @@ static const struct regulator_ops act8945a_ops = {
.name = _name, \
.supply_name = _supply, \
.of_match = of_match_ptr("REG_"#_id), \
+ .of_map_mode = act8945a_of_map_mode, \
.regulators_node = of_match_ptr("regulators"), \
.id = _family##_ID_##_id, \
.type = REGULATOR_VOLTAGE, \
@@ -124,13 +279,17 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
{
struct regulator_config config = { };
const struct regulator_desc *regulators;
+ struct act8945a_pmic *act8945a;
struct regulator_dev *rdev;
- struct regmap *regmap;
int i, num_regulators;
bool voltage_select;

- regmap = dev_get_regmap(pdev->dev.parent, NULL);
- if (!regmap) {
+ act8945a = devm_kzalloc(&pdev->dev, sizeof(*act8945a), GFP_KERNEL);
+ if (!act8945a)
+ return -ENOMEM;
+
+ act8945a->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!act8945a->regmap) {
dev_err(&pdev->dev,
"could not retrieve regmap from parent device\n");
return -EINVAL;
@@ -149,6 +308,7 @@ static int act8945a_pmic_probe(struct platform_device *pdev)

config.dev = &pdev->dev;
config.dev->of_node = pdev->dev.parent->of_node;
+ config.driver_data = act8945a;
for (i = 0; i < num_regulators; i++) {
rdev = devm_regulator_register(&pdev->dev, &regulators[i], &config);
if (IS_ERR(rdev)) {
@@ -159,13 +319,29 @@ static int act8945a_pmic_probe(struct platform_device *pdev)
}
}

+ platform_set_drvdata(pdev, act8945a);
+
/* Unlock expert registers. */
- return regmap_write(regmap, ACT8945A_SYS_UNLK_REGS, 0xef);
+ return regmap_write(act8945a->regmap, ACT8945A_SYS_UNLK_REGS, 0xef);
}

+static int act8945a_suspend(struct device *pdev)
+{
+ struct act8945a_pmic *act8945a = dev_get_drvdata(pdev);
+
+ /*
+ * Ask the PMIC to enter the suspend mode on the next PWRHLD
+ * transition.
+ */
+ return regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x42);
+}
+
+SIMPLE_DEV_PM_OPS(act8945a_pm, act8945a_suspend, NULL);
+
static struct platform_driver act8945a_pmic_driver = {
.driver = {
.name = "act8945a-regulator",
+ .pm = &act8945a_pm,
},
.probe = act8945a_pmic_probe,
};
diff --git a/include/dt-bindings/regulator/active-semi,8945a-regulator.h b/include/dt-bindings/regulator/active-semi,8945a-regulator.h
new file mode 100644
index 000000000000..9bdba5e3141a
--- /dev/null
+++ b/include/dt-bindings/regulator/active-semi,8945a-regulator.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 Microchip Technology, Inc. All rights reserved.
+ *
+ * Device Tree binding constants for the ACT8945A PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_ACT8945A_H
+#define _DT_BINDINGS_REGULATOR_ACT8945A_H
+
+/*
+ * These constants should be used to specify regulator modes in device tree for
+ * ACT8945A regulators as follows:
+ * ACT8945A_REGULATOR_MODE_FIXED: It is specific to DCDC regulators and it
+ * specifies the usage of fixed-frequency
+ * PWM.
+ *
+ * ACT8945A_REGULATOR_MODE_NORMAL: It is specific to LDO regulators and it
+ * specifies the usage of normal mode.
+ *
+ * ACT8945A_REGULATOR_MODE_LOWPOWER: For DCDC and LDO regulators; it specify
+ * the usage of proprietary power-saving
+ * mode.
+ */
+
+#define ACT8945A_REGULATOR_MODE_FIXED 1
+#define ACT8945A_REGULATOR_MODE_NORMAL 2
+#define ACT8945A_REGULATOR_MODE_LOWPOWER 3
+
+#endif
--
2.19.0.rc2
\
 
 \ /
  Last update: 2018-12-13 13:09    [W:0.076 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site