lkml.org 
[lkml]   [2018]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC v2 14/20] iommu: introduce device fault data
From
Date
Hi Jacob,

On 9/21/18 12:06 AM, Jacob Pan wrote:
> On Tue, 18 Sep 2018 16:24:51 +0200
> Eric Auger <eric.auger@redhat.com> wrote:
>
>> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
>>
>> Device faults detected by IOMMU can be reported outside IOMMU
>> subsystem for further processing. This patch intends to provide
>> a generic device fault data such that device drivers can be
>> communicated with IOMMU faults without model specific knowledge.
>>
>> The proposed format is the result of discussion at:
>> https://lkml.org/lkml/2017/11/10/291
>> Part of the code is based on Jean-Philippe Brucker's patchset
>> (https://patchwork.kernel.org/patch/9989315/).
>>
>> The assumption is that model specific IOMMU driver can filter and
>> handle most of the internal faults if the cause is within IOMMU driver
>> control. Therefore, the fault reasons can be reported are grouped
>> and generalized based common specifications such as PCI ATS.
>>
>> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
>> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
>> Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
>> Signed-off-by: Ashok Raj <ashok.raj@intel.com>
>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>> [moved part of the iommu_fault_event struct in the uapi, enriched
>> the fault reasons to be able to map unrecoverable SMMUv3 errors]
> Sounds good to me.
> There are also other "enrichment" we need to do to support mdev or
> finer granularity fault reporting below physical device. e.g. PASID
> level.
>
> The current scheme works for PCIe physical device level, where each
> device registers a single handler only once. When device fault is
> detected by the IOMMU, it will find the matching handler and private
> data to report back. However, for devices partitioned by PASID and
> represented by mdev this may not work. Since IOMMU is not mdev aware
> and only works at physical device level.
> So I am thinking we should allow multiple registration of fault handler
> with different data and ID. i.e.
>
> int iommu_register_device_fault_handler(struct device *dev,
> iommu_dev_fault_handler_t handler,
> int id,
> void *data)
>
> where the new "id field" is
> * @id: Identification of the handler private data, will be used by fault
> * reporting code to match the handler data to be returned. For page
> * request, this can be the PASID. ID must be unique per device, i.e.
> * each ID can only be registered once per device.
> * - IOMMU_DEV_FAULT_ID_UNRECOVERY (~0U) is reserved for fault reporting
> * w/o ID. e.g. unrecoverable faults.
>
> I am still testing, but just wanted to have feedback on this idea.

I am currently respinning this series. Do you have a respin for this
patch including iommu_register_device_fault_handler with the @id param
as you suggested above? Otherwise 2 solutions: I keep the code as is or
I do the modification myself implementing a list of fault_params?

Besides do you plans for "[PATCH v5 00/23] IOMMU and VT-d driver support
for Shared Virtual Address (SVA)" respin - hope I didn't miss anything? - ?

Thanks

Eric
>
> Thanks,
>
> Jacob
>
>
>> ---
>> include/linux/iommu.h | 55 ++++++++++++++++++++++++-
>> include/uapi/linux/iommu.h | 83
>> ++++++++++++++++++++++++++++++++++++++ 2 files changed, 136
>> insertions(+), 2 deletions(-)
>>
>> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
>> index 9bd3e63d562b..7529c14ff506 100644
>> --- a/include/linux/iommu.h
>> +++ b/include/linux/iommu.h
>> @@ -49,13 +49,17 @@ struct bus_type;
>> struct device;
>> struct iommu_domain;
>> struct notifier_block;
>> +struct iommu_fault_event;
>>
>> /* iommu fault flags */
>> -#define IOMMU_FAULT_READ 0x0
>> -#define IOMMU_FAULT_WRITE 0x1
>> +#define IOMMU_FAULT_READ (1 << 0)
>> +#define IOMMU_FAULT_WRITE (1 << 1)
>> +#define IOMMU_FAULT_EXEC (1 << 2)
>> +#define IOMMU_FAULT_PRIV (1 << 3)
>>
>> typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
>> struct device *, unsigned long, int, void *);
>> +typedef int (*iommu_dev_fault_handler_t)(struct iommu_fault_event *,
>> void *);
>> struct iommu_domain_geometry {
>> dma_addr_t aperture_start; /* First address that can be
>> mapped */ @@ -262,6 +266,52 @@ struct iommu_device {
>> struct device *dev;
>> };
>>
>> +/**
>> + * struct iommu_fault_event - Generic per device fault data
>> + *
>> + * - PCI and non-PCI devices
>> + * - Recoverable faults (e.g. page request), information based on
>> PCI ATS
>> + * and PASID spec.
>> + * - Un-recoverable faults of device interest
>> + * - DMA remapping and IRQ remapping faults
>> + *
>> + * @fault: fault descriptor
>> + * @device_private: if present, uniquely identify device-specific
>> + * private data for an individual page request.
>> + * @iommu_private: used by the IOMMU driver for storing
>> fault-specific
>> + * data. Users should not modify this field before
>> + * sending the fault response.
>> + */
>> +struct iommu_fault_event {
>> + struct iommu_fault fault;
>> + u64 device_private;
>> + u64 iommu_private;
>> +};
>> +
>> +/**
>> + * struct iommu_fault_param - per-device IOMMU fault data
>> + * @dev_fault_handler: Callback function to handle IOMMU faults at
>> device level
>> + * @data: handler private data
>> + *
>> + */
>> +struct iommu_fault_param {
>> + iommu_dev_fault_handler_t handler;
>> + void *data;
>> +};
>> +
>> +/**
>> + * struct iommu_param - collection of per-device IOMMU data
>> + *
>> + * @fault_param: IOMMU detected device fault reporting data
>> + *
>> + * TODO: migrate other per device data pointers under
>> iommu_dev_data, e.g.
>> + * struct iommu_group *iommu_group;
>> + * struct iommu_fwspec *iommu_fwspec;
>> + */
>> +struct iommu_param {
>> + struct iommu_fault_param *fault_param;
>> +};
>> +
>> int iommu_device_register(struct iommu_device *iommu);
>> void iommu_device_unregister(struct iommu_device *iommu);
>> int iommu_device_sysfs_add(struct iommu_device *iommu,
>> @@ -429,6 +479,7 @@ struct iommu_ops {};
>> struct iommu_group {};
>> struct iommu_fwspec {};
>> struct iommu_device {};
>> +struct iommu_fault_param {};
>>
>> static inline bool iommu_present(struct bus_type *bus)
>> {
>> diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
>> index 21adb2a964e5..a0fe5c2fb236 100644
>> --- a/include/uapi/linux/iommu.h
>> +++ b/include/uapi/linux/iommu.h
>> @@ -150,5 +150,88 @@ struct iommu_guest_msi_binding {
>> __u64 gpa;
>> __u32 granule;
>> };
>> +
>> +/* Generic fault types, can be expanded IRQ remapping fault */
>> +enum iommu_fault_type {
>> + IOMMU_FAULT_DMA_UNRECOV = 1, /* unrecoverable fault */
>> + IOMMU_FAULT_PAGE_REQ, /* page request fault */
>> +};
>> +
>> +enum iommu_fault_reason {
>> + IOMMU_FAULT_REASON_UNKNOWN = 0,
>> +
>> + /* IOMMU internal error, no specific reason to report out */
>> + IOMMU_FAULT_REASON_INTERNAL,
>> +
>> + /* Could not access the PASID table (fetch caused external
>> abort) */
>> + IOMMU_FAULT_REASON_PASID_FETCH,
>> +
>> + /* could not access the device context (fetch caused
>> external abort) */
>> + IOMMU_FAULT_REASON_DEVICE_CONTEXT_FETCH,
>> +
>> + /* pasid entry is invalid or has configuration errors */
>> + IOMMU_FAULT_REASON_BAD_PASID_ENTRY,
>> +
>> + /* device context entry is invalid or has configuration
>> errors */
>> + IOMMU_FAULT_REASON_BAD_DEVICE_CONTEXT_ENTRY,
>> + /*
>> + * PASID is out of range (e.g. exceeds the maximum PASID
>> + * supported by the IOMMU) or disabled.
>> + */
>> + IOMMU_FAULT_REASON_PASID_INVALID,
>> +
>> + /* source id is out of range */
>> + IOMMU_FAULT_REASON_SOURCEID_INVALID,
>> +
>> + /*
>> + * An external abort occurred fetching (or updating) a
>> translation
>> + * table descriptor
>> + */
>> + IOMMU_FAULT_REASON_WALK_EABT,
>> +
>> + /*
>> + * Could not access the page table entry (Bad address),
>> + * actual translation fault
>> + */
>> + IOMMU_FAULT_REASON_PTE_FETCH,
>> +
>> + /* Protection flag check failed */
>> + IOMMU_FAULT_REASON_PERMISSION,
>> +
>> + /* access flag check failed */
>> + IOMMU_FAULT_REASON_ACCESS,
>> +
>> + /* Output address of a translation stage caused Address Size
>> fault */
>> + IOMMU_FAULT_REASON_OOR_ADDRESS
>> +};
>> +
>> +/**
>> + * struct iommu_fault - Generic fault data
>> + *
>> + * @type contains fault type
>> + * @reason fault reasons if relevant outside IOMMU driver.
>> + * IOMMU driver internal faults are not reported.
>> + * @addr: tells the offending page address
>> + * @fetch_addr: tells the address that caused an abort, if any
>> + * @pasid: contains process address space ID, used in shared virtual
>> memory
>> + * @page_req_group_id: page request group index
>> + * @last_req: last request in a page request group
>> + * @pasid_valid: indicates if the PRQ has a valid PASID
>> + * @prot: page access protection flag:
>> + * IOMMU_FAULT_READ, IOMMU_FAULT_WRITE
>> + */
>> +
>> +struct iommu_fault {
>> + __u32 type; /* enum iommu_fault_type */
>> + __u32 reason; /* enum iommu_fault_reason */
>> + __u64 addr;
>> + __u64 fetch_addr;
>> + __u32 pasid;
>> + __u32 page_req_group_id;
>> + __u32 last_req;
>> + __u32 pasid_valid;
>> + __u32 prot;
>> + __u32 access;
>> +};
>> #endif /* _UAPI_IOMMU_H */
>>
>
> [Jacob Pan]
>

\
 
 \ /
  Last update: 2018-12-12 09:22    [W:0.109 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site