lkml.org 
[lkml]   [2018]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 12/17] drm/sun4i: sun6i_mipi_dsi: Set proper vblk timing calculation
Date
Unlike hblk, the vblk timings should follow an equation to compute
the desired value for lane 4 devices and rest of devices it would be 0.

BSP code from BPI-M64-bsp is computing vblk as for 4-lane devices
(from linux-sunxi
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)

tmp = (ht*dsi_pixel_bits[format]/8)*vt-(4+dsi_hblk+2);
dsi_vblk = (lane-tmp%lane);

So, update the vblk timing calculation accordingly.

Tested on 2-lane, 4-lane MIPI-DSI LCD panels.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 29 +++++++++++++++++++-------
1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index d8947be92f9d..cbcef7bf7681 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -355,6 +355,27 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi,
SUN6I_DSI_INST_JUMP_CFG_NUM(1));
};

+static u16 sun6i_dsi_get_timings_vblk(struct sun6i_dsi *dsi,
+ struct drm_display_mode *mode, u16 hblk)
+{
+ struct mipi_dsi_device *device = dsi->device;
+ unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
+ int tmp;
+
+ if (device->lanes != 4)
+ return 0;
+
+ /*
+ * The vertical blank is set using a blanking packet (4 bytes +
+ * payload + 2 bytes). Its minimal size is therefore 6 bytes
+ */
+#define VBLK_PACKET_OVERHEAD 6
+ tmp = (mode->htotal * Bpp) * mode->vtotal -
+ (hblk + VBLK_PACKET_OVERHEAD);
+
+ return (device->lanes - tmp % device->lanes);
+}
+
static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi,
struct drm_display_mode *mode)
{
@@ -503,13 +524,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
(mode->htotal - (mode->hsync_end - mode->hsync_start)) *
Bpp - HBLK_PACKET_OVERHEAD);

- /*
- * And I'm not entirely sure what vblk is about. The driver in
- * Allwinner BSP is using a rather convoluted calculation
- * there only for 4 lanes. However, using 0 (the !4 lanes
- * case) even with a 4 lanes screen seems to work...
- */
- vblk = 0;
+ vblk = sun6i_dsi_get_timings_vblk(dsi, mode, hblk);

/* How many bytes do we need to send all payloads? */
bytes = max_t(size_t, max(max(hfp, hblk), max(hsa, hbp)), vblk);
--
2.18.0.321.gffc6fa0e3
\
 
 \ /
  Last update: 2018-12-10 17:19    [W:0.252 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site