lkml.org 
[lkml]   [2018]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/13 v2] regulator: tps65090: Hand over GPIO to regulator core
Date
The GPIO descriptors used by the TPS65090 driver are retrieved
during probe() and it is really helpful to have those under
devres management because of all the errorpaths in the
intialization.

Using the new dev_gpiod_unhinge() call we can remove the
devres management of the descriptor right before handing
it over to the regulators core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- New patch handling this drivers GPIO descriptors properly.
---
drivers/regulator/tps65090-regulator.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index db714d5edafc..0614551796a1 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -480,6 +480,12 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
else
config.of_node = NULL;

+ /*
+ * Hand the GPIO descriptor management over to the regulator
+ * core, remove it from devres management.
+ */
+ if (config.ena_gpiod)
+ devm_gpiod_unhinge(&pdev->dev, config.ena_gpiod);
rdev = devm_regulator_register(&pdev->dev, ri->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
--
2.19.1
\
 
 \ /
  Last update: 2018-12-01 16:54    [W:0.106 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site