lkml.org 
[lkml]   [2018]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/7] staging:iio:ad2s90: Remove spi setup that should be done via dt
On Fri, 23 Nov 2018 22:23:07 -0200
Matheus Tavares <matheus.bernardino@usp.br> wrote:

> The ad2s90 driver currently sets some spi settings (max_speed_hz and
> mode) at ad2s90_probe. Since the maximum frequency is a required element
> in DT binding for spi slave devices and because the spi mode for the
> device can be either (0,0) or (1,1), these settings should be handled
> via device tree, not in the driver's code. This patch removes them from
> the probe function.
>
> Note: The way in which the mentioned spi settings need to be specified
> on the ad2s90's node of a device tree will be documented in the future
> patch "dt-bindings:iio:resolver: Add docs for ad2s90".
>
> Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>

Applied,

Thanks,

Jonathan

> ---
> Changes in v3:
> - none
>
> Changes in v2:
> - Rewritten patch message to better explain why the code snippet in
> question should be removed.
>
> drivers/staging/iio/resolver/ad2s90.c | 11 -----------
> 1 file changed, 11 deletions(-)
>
> diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
> index fdae067ed866..abb9b9147ee6 100644
> --- a/drivers/staging/iio/resolver/ad2s90.c
> +++ b/drivers/staging/iio/resolver/ad2s90.c
> @@ -77,7 +77,6 @@ static int ad2s90_probe(struct spi_device *spi)
> {
> struct iio_dev *indio_dev;
> struct ad2s90_state *st;
> - int ret;
>
> indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> if (!indio_dev)
> @@ -94,16 +93,6 @@ static int ad2s90_probe(struct spi_device *spi)
> indio_dev->num_channels = 1;
> indio_dev->name = spi_get_device_id(spi)->name;
>
> - /* need 600ns between CS and the first falling edge of SCLK */
> - spi->max_speed_hz = 830000;
> - spi->mode = SPI_MODE_3;
> - ret = spi_setup(spi);
> -
> - if (ret < 0) {
> - dev_err(&spi->dev, "spi_setup failed!\n");
> - return ret;
> - }
> -
> return devm_iio_device_register(indio_dev->dev.parent, indio_dev);
> }
>

\
 
 \ /
  Last update: 2018-12-01 16:35    [W:0.182 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site