lkml.org 
[lkml]   [2018]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 06/10] usb: dwc3: don't issue no-op trb for stream capable endpoints
Date
The stream capable endpoints require stream id to be given
when issuing START TRANSFER. While issuing no-op trb the
stream id is not yet known, so don't issue no-op trb's on
stream capable endpoints.

Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
---
Changes in v7:
1. Reverted to dep->stream_capable from dep->endpoint.stream_capable

Changes in v6:
1. Replaced dep->stream_capable with dep->endpoint.stream_capable

Changes in v5:
1. None

Changes in v4:
1. None

Changes in v3:
1. None

Changes in v2:
1. None
---
drivers/usb/dwc3/gadget.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3edfc0b..78c9bc6 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -673,7 +673,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
* Issue StartTransfer here with no-op TRB so we can always rely on No
* Response Update Transfer command.
*/
- if (usb_endpoint_xfer_bulk(desc) ||
+ if ((usb_endpoint_xfer_bulk(desc) && !dep->stream_capable) ||
usb_endpoint_xfer_int(desc)) {
struct dwc3_gadget_ep_cmd_params params;
struct dwc3_trb *trb;
--
2.1.1
\
 
 \ /
  Last update: 2018-12-01 12:15    [W:1.828 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site