lkml.org 
[lkml]   [2018]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [LINUX PATCH v12 1/3] dt-bindings: mtd: arasan: Add device tree binding documentation
Date
Hi Miquel,

> -----Original Message-----
> From: Miquel Raynal [mailto:miquel.raynal@bootlin.com]
> Sent: Friday, November 9, 2018 6:24 PM
> To: Naga Sureshkumar Relli <nagasure@xilinx.com>
> Cc: Boris Brezillon <boris.brezillon@bootlin.com>; richard@nod.at; dwmw2@infradead.org;
> computersforpeace@gmail.com; marek.vasut@gmail.com; Michal Simek
> <michals@xilinx.com>; linux-mtd@lists.infradead.org; linux-kernel@vger.kernel.org;
> nagasuresh12@gmail.com; robh@kernel.org
> Subject: Re: [LINUX PATCH v12 1/3] dt-bindings: mtd: arasan: Add device tree binding
> documentation
>
> Hi Naga,
>
> [...]
>
> > > > diff --git a/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > > > b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > > > new file mode 100644
> > > > index 0000000..b522daf
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
> > > > @@ -0,0 +1,32 @@
> > > > +Arasan NAND Flash Controller with ONFI 3.1 support
> > > > +
> > > > +Required properties:
> > > > +- compatible: Should be "xlnx,zynqmp-nand", "arasan,nfc-v3p10"
> > > > +- reg: Memory map for module access
> > > > +- interrupts: Should contain the interrupt for the device
> > > > +- clock-name: List of input clocks - "sys", "flash"
> > > > + (See clock bindings for details)
> > > > +- clocks: Clock phandles (see clock bindings for details)
> > > > +
> > > > +Required properties for child node:
> > > > +- nand-ecc-mode: see nand.txt
> > >
> > > Why is it required? Can't you fallback to HW when this prop is missing?
> > Yes, we can.
> > Do you want me to update that in driver now?
> > Looks like you have some comments in driver as well, so while
> > addressing those I will update the code to fallback to HW ECC when It is missing.
>
> Yes, please.
>
> >
> > > Oh, and reg is not listed in the required props.
> > Which reg?
> > I already mention this " reg: Memory map for module access " in required properties.
> >
> > Thanks,
> > Naga Sureshkumar Relli
> > >
> > > > +
> > > > +For NAND partition information please refer the below file
> > > > +Documentation/devicetree/bindings/mtd/partition.txt
> > > > +
> > > > +Example:
> > > > + nfc: nand@ff100000 {
> > > > + compatible = "xlnx,zynqmp-nand", "arasan,nfc-v3p10";
> > > > + reg = <0x0 0xff100000 0x1000>;
> > > > + clock-name = "sys", "flash";
> > > > + clocks = <&misc_clk &misc_clk>;
> > > > + interrupt-parent = <&gic>;
> > > > + interrupts = <0 14 4>;
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > +
> > > > + nand@0 {
> > > > + reg = <0>;
>
> This one, for the CS line(s).
Ok got it. I will update.

Thanks,
Naga Sureshkumar Relli
>
> > > > + nand-ecc-mode = "hw";
> > > > + };
> > > > + };
> >
>
>
> Thanks,
> Miquèl
\
 
 \ /
  Last update: 2018-11-09 14:20    [W:0.139 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site