lkml.org 
[lkml]   [2018]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4] usb/mtu3: power down device ip at setup
Thanks!

On Thu, Nov 29, 2018 at 2:26 PM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
>
> hi Hsin-Yi,
>
> On Thu, 2018-11-29 at 11:16 +0800, Hsin-Yi, Wang wrote:
> > Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip,
> > so host ip sleep will fail at ssusb_host_disable.
> >
> > Power down device ip at ssusb_host_setup.
> >
> > Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
> > ---
> > ChangeLog:
> > V3->V4:
> > *update comment
> > ---
> > drivers/usb/mtu3/mtu3_plat.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
> > index 46551f6d16fd..e086630e41a9 100644
> > --- a/drivers/usb/mtu3/mtu3_plat.c
> > +++ b/drivers/usb/mtu3/mtu3_plat.c
> > @@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
> > mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
> > udelay(1);
> > mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
> > +
> > + /*
> > + * device ip may be powered on in firmware/BROM stage before entering
> > + * kernel stage;
> > + * power down device ip, otherwise ip-sleep will fail when working as
> > + * host only mode
> > + */
> > + mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
> > }
> >
> > /* ignore the error if the clock does not exist */
>
> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
>
> Thanks a lot
>
>
>

\
 
 \ /
  Last update: 2018-11-29 08:51    [W:0.141 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site