lkml.org 
[lkml]   [2018]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] pci: imx6: support kernels built in Thumb-2 mode
On Wed, Nov 28, 2018 at 02:25:54PM +0100, Stefan Agner wrote:
> Add a fault handler which handles reads in Thumb-2 mode. Install
> the appropriate handler depending on which mode the kernel has
> been built. This avoids an "Unhandled fault: external abort on
> non-linefetch (0x1008) at 0xf0a80000" during boot on a device
> with a PCIe switch connected.
>
> Link: https://lore.kernel.org/linux-pci/20181126161645.8177-1-stefan@agner.ch/
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> FWIW, I found this manual helpful to write the code below:
> http://hermes.wings.cs.wisc.edu/files/Thumb-2SupplementReferenceManual.pdf#page=43&zoom=100,0,66
>
> --
> Stefan
>
> drivers/pci/controller/dwc/pci-imx6.c | 37 ++++++++++++++++++++++++++-
> 1 file changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 69f86234f7c0..683deb74d69f 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -29,6 +29,7 @@
> #include <linux/reset.h>
> #include <linux/pm_domain.h>
> #include <linux/pm_runtime.h>
> +#include <asm/opcodes.h>
>
> #include "pcie-designware.h"
>
> @@ -299,6 +300,37 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
> return 1;
> }
>
> +static int imx6q_pcie_abort_handler_thumb2(unsigned long addr,
> + unsigned int fsr, struct pt_regs *regs)
> +{
> + unsigned long pc = instruction_pointer(regs);
> + unsigned long instr = *(unsigned long *)pc;

So what happens if userspace mmap()s the PCIe space (eg, via
/dev/mem), and then accesses it, triggering this fault? You'll
be attempting to read from userspace here, which will oops the
kernel. The kernel is not allowed to access userspace by
simply dereferencing a pointer.

> + unsigned long thumb2_instr = __mem_to_opcode_thumb16(instr);
> + int reg = thumb2_instr & 7;
> +
> + if (!__opcode_is_thumb16(instr & 0x0000ffffUL))
> + return 1;
> +
> + /* Load word/byte and halfword immediate offset */
> + if (((thumb2_instr & 0xe800) == 0x6800) ||
> + ((thumb2_instr & 0xf800) == 0x8800)) {
> + unsigned long val;
> +
> + if (thumb2_instr & 0x1000)
> + val = 0xff;
> + else if (thumb2_instr & 0x8000)
> + val = 0xffff;
> + else
> + val = 0xffffffffUL;
> +
> + regs->uregs[reg] = val;
> + regs->ARM_pc += 2;
> + return 0;
> + }
> +
> + return 1;
> +}
> +
> static int imx6_pcie_attach_pd(struct device *dev)
> {
> struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> @@ -1069,6 +1101,8 @@ static struct platform_driver imx6_pcie_driver = {
>
> static int __init imx6_pcie_init(void)
> {
> + bool thumb2 = IS_ENABLED(CONFIG_THUMB2_KERNEL);
> +
> /*
> * Since probe() can be deferred we need to make sure that
> * hook_fault_code is not called after __init memory is freed
> @@ -1076,7 +1110,8 @@ static int __init imx6_pcie_init(void)
> * we can install the handler here without risking it
> * accessing some uninitialized driver state.
> */
> - hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
> + hook_fault_code(8, thumb2 ? imx6q_pcie_abort_handler_thumb2 :
> + imx6q_pcie_abort_handler, SIGBUS, 0,
> "external abort on non-linefetch");
>
> return platform_driver_register(&imx6_pcie_driver);
> --
> 2.19.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

\
 
 \ /
  Last update: 2018-11-28 19:02    [W:0.150 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site