lkml.org 
[lkml]   [2018]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] usb: mtu3: enable SETUPENDISR interrupt
Date
If the controller receives a new SETUP during SETUP data stage,
and will generate SETUPENDISR interrupt, the driver should abort
the current SETUP command and process the new one.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/mtu3/mtu3_core.c | 2 +-
drivers/usb/mtu3/mtu3_gadget_ep0.c | 6 +++++-
drivers/usb/mtu3/mtu3_hw_regs.h | 1 +
3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 1ffc0bc31c1d..b6b20949d63a 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -484,7 +484,7 @@ void mtu3_ep0_setup(struct mtu3 *mtu)
mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);

/* Enable EP0 interrupt */
- mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR);
+ mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR);
}

static int mtu3_mem_alloc(struct mtu3 *mtu)
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 3c464d8ae023..7cb7ac980446 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -692,9 +692,13 @@ irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu)
mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */

/* only handle ep0's */
- if (!(int_status & EP0ISR))
+ if (!(int_status & (EP0ISR | SETUPENDISR)))
return IRQ_NONE;

+ /* abort current SETUP, and process new one */
+ if (int_status & SETUPENDISR)
+ mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+
csr = mtu3_readl(mbase, U3D_EP0CSR);

dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr);
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index a45bb253939f..d11fcd64c19d 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -104,6 +104,7 @@

/* U3D_EPISR */
#define EPRISR(x) (BIT(16) << (x))
+#define SETUPENDISR BIT(16)
#define EPTISR(x) (BIT(0) << (x))
#define EP0ISR BIT(0)

--
2.19.1
\
 
 \ /
  Last update: 2018-11-29 03:37    [W:0.105 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site