lkml.org 
[lkml]   [2018]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 4/4] ARM: dts: meson: consistently disable pin bias
Date
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:

> On Fri, Nov 9, 2018 at 3:05 PM Jerome Brunet <jbrunet@baylibre.com> wrote:
>>
>> On Amlogic chipsets, the bias set through pinconf applies to the pad
>> itself, not only the GPIO function. This means that even when we change
>> the function of the pad from GPIO to anything else, the bias previously
>> set still applies.
>>
>> As we have seen with the eMMC, depending on the bias type and the function,
>> it may trigger problems.
>>
>> The underlying issue is that we inherit whatever was left by previous user
>> of the pad (pinconf, u-boot or the ROM code). As a consequence, the actual
>> setup we will get is undefined.
>>
>> There is nothing mentioned in the documentation about pad bias and pinmux
>> function, however leaving it undefined is not an option.
>>
>> This change consistently disable the pad bias for every pinmux functions.
>> It seems to work well, we can only assume that the necessary bias (if any)
>> is already provided by the pin function itself.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> Acked-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>
>
> my Odroid-C1 still boots fine from SD card and Ethernet (ping) also still works
>
> Kevin, can you please move this patch from your v4.21/dt64 branch to
> the v4.21/dt (32-bit) branch?
> all other patches from this series are for the 64-bit SoCs, so only
> this single patch has to be moved

Thanks for catching it.

I moved it to the 32-bit branch, and added your ack.

Kevin

\
 
 \ /
  Last update: 2018-11-29 01:45    [W:0.075 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site