lkml.org 
[lkml]   [2018]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.18 38/83] Input: xpad - workaround dead irq_out after suspend/ resume
Date
3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4220f7db1e424f2a086ad41217b5770cc9f003a9 ]

The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also
reproduced by Zachary Lund [0]) Work around this by implementing
suspend, resume, and reset_resume callbacks and properly shutting down
URBs on suspend and restarting them on resume.

[0]: https://github.com/paroj/xpad/issues/6

Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/joystick/xpad.c | 175 ++++++++++++++++++++++++++--------
1 file changed, 137 insertions(+), 38 deletions(-)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 68197239e327..41db1f2ed122 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -82,6 +82,7 @@
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/usb/input.h>
+#include <linux/usb/quirks.h>

#define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
#define DRIVER_DESC "X-Box pad driver"
@@ -348,9 +349,10 @@ struct usb_xpad {
dma_addr_t idata_dma;

struct urb *irq_out; /* urb for interrupt out report */
+ struct usb_anchor irq_out_anchor;
bool irq_out_active; /* we must not use an active URB */
- unsigned char *odata; /* output data */
u8 odata_serial; /* serial number for xbox one protocol */
+ unsigned char *odata; /* output data */
dma_addr_t odata_dma;
spinlock_t odata_lock;

@@ -766,11 +768,13 @@ static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad)
int error;

if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
+ usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
if (error) {
dev_err(&xpad->intf->dev,
"%s - usb_submit_urb failed with result %d\n",
__func__, error);
+ usb_unanchor_urb(xpad->irq_out);
return -EIO;
}

@@ -813,11 +817,13 @@ static void xpad_irq_out(struct urb *urb)
}

if (xpad->irq_out_active) {
+ usb_anchor_urb(urb, &xpad->irq_out_anchor);
error = usb_submit_urb(urb, GFP_ATOMIC);
if (error) {
dev_err(dev,
"%s - usb_submit_urb failed with result %d\n",
__func__, error);
+ usb_unanchor_urb(urb);
xpad->irq_out_active = false;
}
}
@@ -834,6 +840,8 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
if (xpad->xtype == XTYPE_UNKNOWN)
return 0;

+ init_usb_anchor(&xpad->irq_out_anchor);
+
xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->odata_dma);
if (!xpad->odata) {
@@ -868,8 +876,14 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)

static void xpad_stop_output(struct usb_xpad *xpad)
{
- if (xpad->xtype != XTYPE_UNKNOWN)
- usb_kill_urb(xpad->irq_out);
+ if (xpad->xtype != XTYPE_UNKNOWN) {
+ if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
+ 5000)) {
+ dev_warn(&xpad->intf->dev,
+ "timed out waiting for output URB to complete, killing\n");
+ usb_kill_anchored_urbs(&xpad->irq_out_anchor);
+ }
+ }
}

static void xpad_deinit_output(struct usb_xpad *xpad)
@@ -1198,32 +1212,73 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) { }
static void xpad_identify_controller(struct usb_xpad *xpad) { }
#endif

-static int xpad_open(struct input_dev *dev)
+static int xpad_start_input(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = input_get_drvdata(dev);
-
- /* URB was submitted in probe */
- if (xpad->xtype == XTYPE_XBOX360W)
- return 0;
+ int error;

- xpad->irq_in->dev = xpad->udev;
if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
return -EIO;

- if (xpad->xtype == XTYPE_XBOXONE)
- return xpad_start_xbox_one(xpad);
+ if (xpad->xtype == XTYPE_XBOXONE) {
+ error = xpad_start_xbox_one(xpad);
+ if (error) {
+ usb_kill_urb(xpad->irq_in);
+ return error;
+ }
+ }

return 0;
}

-static void xpad_close(struct input_dev *dev)
+static void xpad_stop_input(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = input_get_drvdata(dev);
+ usb_kill_urb(xpad->irq_in);
+}
+
+static int xpad360w_start_input(struct usb_xpad *xpad)
+{
+ int error;
+
+ error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+ if (error)
+ return -EIO;

- if (xpad->xtype != XTYPE_XBOX360W)
+ /*
+ * Send presence packet.
+ * This will force the controller to resend connection packets.
+ * This is useful in the case we activate the module after the
+ * adapter has been plugged in, as it won't automatically
+ * send us info about the controllers.
+ */
+ error = xpad_inquiry_pad_presence(xpad);
+ if (error) {
usb_kill_urb(xpad->irq_in);
+ return error;
+ }

- xpad_stop_output(xpad);
+ return 0;
+}
+
+static void xpad360w_stop_input(struct usb_xpad *xpad)
+{
+ usb_kill_urb(xpad->irq_in);
+
+ /* Make sure we are done with presence work if it was scheduled */
+ flush_work(&xpad->work);
+}
+
+static int xpad_open(struct input_dev *dev)
+{
+ struct usb_xpad *xpad = input_get_drvdata(dev);
+
+ return xpad_start_input(xpad);
+}
+
+static void xpad_close(struct input_dev *dev)
+{
+ struct usb_xpad *xpad = input_get_drvdata(dev);
+
+ xpad_stop_input(xpad);
}

static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
@@ -1278,8 +1333,10 @@ static int xpad_init_input(struct usb_xpad *xpad)

input_set_drvdata(input_dev, xpad);

- input_dev->open = xpad_open;
- input_dev->close = xpad_close;
+ if (xpad->xtype != XTYPE_XBOX360W) {
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
+ }

__set_bit(EV_KEY, input_dev->evbit);

@@ -1450,21 +1507,17 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
* exactly the message that a controller has arrived that
* we're waiting for.
*/
- xpad->irq_in->dev = xpad->udev;
- error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+ error = xpad360w_start_input(xpad);
if (error)
goto err_deinit_output;
-
/*
- * Send presence packet.
- * This will force the controller to resend connection packets.
- * This is useful in the case we activate the module after the
- * adapter has been plugged in, as it won't automatically
- * send us info about the controllers.
+ * Wireless controllers require RESET_RESUME to work properly
+ * after suspend. Ideally this quirk should be in usb core
+ * quirk list, but we have too many vendors producing these
+ * controllers and we'd need to maintain 2 identical lists
+ * here in this driver and in usb core.
*/
- error = xpad_inquiry_pad_presence(xpad);
- if (error)
- goto err_kill_in_urb;
+ udev->quirks |= USB_QUIRK_RESET_RESUME;
} else {
error = xpad_init_input(xpad);
if (error)
@@ -1472,8 +1525,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
}
return 0;

-err_kill_in_urb:
- usb_kill_urb(xpad->irq_in);
err_deinit_output:
xpad_deinit_output(xpad);
err_free_in_urb:
@@ -1483,35 +1534,83 @@ err_free_idata:
err_free_mem:
kfree(xpad);
return error;
-
}

static void xpad_disconnect(struct usb_interface *intf)
{
- struct usb_xpad *xpad = usb_get_intfdata (intf);
+ struct usb_xpad *xpad = usb_get_intfdata(intf);

if (xpad->xtype == XTYPE_XBOX360W)
- usb_kill_urb(xpad->irq_in);
-
- cancel_work_sync(&xpad->work);
+ xpad360w_stop_input(xpad);

xpad_deinit_input(xpad);

+ /*
+ * Now that both input device and LED device are gone we can
+ * stop output URB.
+ */
+ xpad_stop_output(xpad);
+
+ xpad_deinit_output(xpad);
+
usb_free_urb(xpad->irq_in);
usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
xpad->idata, xpad->idata_dma);

- xpad_deinit_output(xpad);
-
kfree(xpad);

usb_set_intfdata(intf, NULL);
}

+static int xpad_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
+ struct input_dev *input = xpad->dev;
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ /*
+ * Wireless controllers always listen to input so
+ * they are notified when controller shows up
+ * or goes away.
+ */
+ xpad360w_stop_input(xpad);
+ } else {
+ mutex_lock(&input->mutex);
+ if (input->users)
+ xpad_stop_input(xpad);
+ mutex_unlock(&input->mutex);
+ }
+
+ xpad_stop_output(xpad);
+
+ return 0;
+}
+
+static int xpad_resume(struct usb_interface *intf)
+{
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
+ struct input_dev *input = xpad->dev;
+ int retval = 0;
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ retval = xpad360w_start_input(xpad);
+ } else {
+ mutex_lock(&input->mutex);
+ if (input->users)
+ retval = xpad_start_input(xpad);
+ mutex_unlock(&input->mutex);
+ }
+
+ return retval;
+}
+
static struct usb_driver xpad_driver = {
.name = "xpad",
.probe = xpad_probe,
.disconnect = xpad_disconnect,
+ .suspend = xpad_suspend,
+ .resume = xpad_resume,
+ .reset_resume = xpad_resume,
.id_table = xpad_table,
};

--
2.17.1


\
 
 \ /
  Last update: 2018-11-29 16:05    [W:0.349 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site