lkml.org 
[lkml]   [2018]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 011/110] usb: xhci: fix uninitialized completion when USB3 port got wrong status
Date
4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Ma <aaron.ma@canonical.com>

commit 958c0bd86075d4ef1c936998deefe1947e539240 upstream.

Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on
Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3,
after clear port reset it works fine.

Since this device is registered on USB3 roothub at boot,
when port status reports not superspeed, xhci_get_port_status will call
an uninitialized completion in bus_state[0].
Kernel will hang because of NULL pointer.

Restrict the USB2 resume status check in USB2 roothub to fix hang issue.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci-ring.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -876,7 +876,7 @@ static u32 xhci_get_port_status(struct u
status |= USB_PORT_STAT_SUSPEND;
}
if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
- !DEV_SUPERSPEED_ANY(raw_port_status)) {
+ !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) {
if ((raw_port_status & PORT_RESET) ||
!(raw_port_status & PORT_PE))
return 0xffffffff;
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1642,7 +1642,7 @@ static void handle_port_status(struct xh
* RExit to a disconnect state). If so, let the the driver know it's
* out of the RExit state.
*/
- if (!DEV_SUPERSPEED_ANY(portsc) &&
+ if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 &&
test_and_clear_bit(hcd_portnum,
&bus_state->rexit_ports)) {
complete(&bus_state->rexit_done[hcd_portnum]);

\
 
 \ /
  Last update: 2018-11-29 15:41    [W:0.217 / U:0.712 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site