lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 4/4] ARM64: dts: imx: add i.MX8QXP system controller RTC support
On 28/11/2018 09:06:27+0000, Anson Huang wrote:
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > index 9155d45..ef57db6 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > > @@ -433,4 +433,8 @@
> > > #size-cells = <1>;
> > > ranges = <0x5f000000 0x0 0x5f000000 0x1000000>;
> > > };
> > > +
> > > + rtc: rtc {
> > > + compatible = "nxp,imx8qxp-sc-rtc";
> > > + };
> > > };
> > IMO this should be disabled by default.
>
> This module is NOT depending on any board design, should it be enabled by default in soc dtsi?
> Like wdog etc..
>

I guess the point is that you may not want it enabled, even if it should
always be working. enabling it by default would affect the RTC ordering
for example.


--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
\
 
 \ /
  Last update: 2018-11-28 10:21    [W:0.072 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site