lkml.org 
[lkml]   [2018]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] loop: Report EOPNOTSUPP properly
On Tue, Oct 30, 2018 at 04:06:23PM -0700, Evan Green wrote:
> Properly plumb out EOPNOTSUPP from loop driver operations, which may
> get returned when for instance a discard operation is attempted but not
> supported by the underlying block device. Before this change, everything
> was reported in the log as an I/O error, which is scary and not
> helpful in debugging.
>
> Signed-off-by: Evan Green <evgreen@chromium.org>
> ---
>
> drivers/block/loop.c | 14 +++++++++++---
> 1 file changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> index abad6d15f9563..28990fc94841a 100644
> --- a/drivers/block/loop.c
> +++ b/drivers/block/loop.c
> @@ -458,8 +458,13 @@ static void lo_complete_rq(struct request *rq)
>
> if (!cmd->use_aio || cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) ||
> req_op(rq) != REQ_OP_READ) {
> - if (cmd->ret < 0)
> - ret = BLK_STS_IOERR;
> + if (cmd->ret < 0) {
> + if (cmd->ret == -EOPNOTSUPP)
> + ret = BLK_STS_NOTSUPP;
> + else
> + ret = BLK_STS_IOERR;
> + }
> +
> goto end_io;
> }
>
> @@ -1788,7 +1793,10 @@ static void loop_handle_cmd(struct loop_cmd *cmd)
> failed:
> /* complete non-aio request */
> if (!cmd->use_aio || ret) {
> - cmd->ret = ret ? -EIO : 0;
> + if (ret == -EOPNOTSUPP)
> + cmd->ret = ret;
> + else
> + cmd->ret = ret ? -EIO : 0;
> blk_mq_complete_request(rq);
> }
> }
> --
> 2.16.4
>

Looks fine:

Reviewed-by: Ming Lei <ming.lei@redhat.com>

Thanks,
Ming

\
 
 \ /
  Last update: 2018-11-28 02:07    [W:0.149 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site