lkml.org 
[lkml]   [2018]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v5 0/2] Add Synopsys High-Speed USB PHY driver for Qualcomm SoCs
    Date
    It's based on a downstream driver from Sriharsha Allenki <sallenki@codeaurora.org>
    that uses USB phy framework, and gets rewrote to adpot generic phy
    framework together with quite some cleanups.

    Changes for v5:
    - Drop mb() call from function qcom_snps_hsphy_init_sequence() and
    qcom_snps_hsphy_por_reset().

    Changes for v4:
    - Kill device tree property 'qcom,init-seq' by moving the settings
    into phy driver as device match data.

    Changes for v3:
    - Use SoC specific compatible "qcom,qcs404-usb-hsphy".
    - Use OF graph instead of extcon bindings to model the link to USB
    connector.

    Changes for v2:
    - Add a pointer to phy/phy-bindings.txt for property #phy-cells.
    - Roll back voltage settings in case function
    qcom_snps_hsphy_config_regulators() fails in the middle.
    - Add a comment for init-seq tuple which consists of 3 numbers.
    - Sort include headers alphabetically.
    - Sort register definitions in order of offset.

    Shawn Guo (1):
    phy: qualcomm: Add Synopsys High-Speed USB PHY driver

    Sriharsha Allenki (1):
    dt-bindings: phy: Add Qualcomm Synopsys High-Speed USB PHY binding

    .../phy/qcom,snps-28nm-usb-hs-phy.txt | 87 +++
    drivers/phy/qualcomm/Kconfig | 10 +
    drivers/phy/qualcomm/Makefile | 1 +
    .../phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c | 529 ++++++++++++++++++
    4 files changed, 627 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-28nm-usb-hs-phy.txt
    create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c

    --
    2.18.0

    \
     
     \ /
      Last update: 2018-11-27 11:08    [W:2.907 / U:0.712 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site