lkml.org 
[lkml]   [2018]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/43] drm/sun4i: Support for linear and tiled YUV formats with the frontend
Date
This series implements support for YUV formats using the display engine
frontend in the sun4i DRM driver, with various fixes along the way.
Scaling is supported for every format handled by the frontend.

The tiling mode used by the VPU on Allwinner platforms is also supported
by this series and a dedicated fourcc modifier is introduced, along with
a specific ioctl for allocating tiled buffers.

New common fourcc helpers are also introduced in this series, especially
related to YUV formats.

This was tested on the A33 and A20 platforms and all supported features
work properly on both. Framebuffer offsets and source positions are not
supported at this point.

Changes since v1:
* Extended source selected cleanup to both YUV and video channels;
* Split and reworded comment about backend scaling;
* Sorted newly-introduced lists alphabetically;
* Simplified functions to check if a format is supported;
* Reworked frontend selection logic as discussed;
* Made YUV helpers common, with fourcc and drm_info fashions;
* Changed the CREATE_TILED ioctl flags to match the CREATE_DUMB ioctl;
* Reworked YUV dimensions calculations to use drm_format_info;
* Dropped MB32 part in modifier to match V4L2 definition name;
* Improved the description of the tiling modifier;
* Avoided splitting CSC coefficients to avoid introducing a new module;
* Fixed building the driver as modules;
* Various code simplifications and cleanups;
* Split commits into logical changes.

Maxime Ripard (5):
drm/sun4i: Move access control before setting the register as
documented
drm/sun4i: frontend: Add a quirk structure
drm/sun4i: Set the coef_rdy bit right after the coef have been set
drm/sun4i: Make COEF_RDY conditional
drm/sun4i: frontend: Move the FIR filter phases to our quirks

Paul Kocialkowski (38):
drm/sun4i: Cleanup video/YUV source before enabling a layer
drm/sun4i: frontend: Replace ARGB with XRGB as supported format
drm/sun4i: Add TODO comment about supporting scaling with the backend
drm/sun4i: backend: Add a helper and a list for supported formats
drm/sun4i: frontend: Add a helper and a list for supported formats
drm/sun4i: backend: Refine the logic behind using the frontend
drm/sun4i: backend: Use a specific function to check if a plane is
supported
drm/fourcc: Add helper to check if a format uses a YUV colorspace
drm/fourcc: Add format info helpers for checking YUV planes
disposition
drm/fourcc: Add format helpers for checking YUV planes disposition
drm/fourcc: Add format info helpers for checking YUV sub-sampling
drm/fourcc: Add format helpers for checking YUV sub-sampling
drm/sun4i: backend: Use explicit fourcc helpers for packed YUV422
check
drm/sun4i: backend: Avoid counting YUV planes that use the frontend
drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formats
drm/sun4i: frontend: Move CSC bypass setup to format update routine
drm/sun4i: frontend: Add helpers for input data mode and pixel
sequence
drm/sun4i: frontend: Add proper definitions for format registers
drm/sun4i: frontend: Determine input mode based on the number of
planes
drm/sun4i: frontend: Determine input format based on colorspace
drm/sun4i: frontend: Add support for the BGRX8888 input format
drm/sun4i: frontend: Add support for the BGRX8888 output format
drm/sun4i: backend: Detail the YUV to RGB values coding explanation
drm/sun4i: frontend: Configure and enable YUV to RGB CSC when needed
drm/sun4i: frontend: Apply format sub-sampling to CH1 dimensions
drm/sun4i: frontend: Add support for packed YUV422 input formats
drm/sun4i: frontend: Add support for semi-planar YUV input formats
drm/sun4i: frontend: Add support for planar YUV input formats
drm/sun4i: Make pitch even for GEM dumb alloc as per hardware
constraint
drm/fourcc: Add definitions for Allwinner vendor and VPU tiled format
drm/sun4i: Add a dedicated ioctl call for allocating tiled buffers
drm/sun4i: Pass modifier to backend and frontend format support
helpers
drm/sun4i: frontend: Add support for tiled YUV input mode
configuration
drm/sun4i: Add buffer stride and offset configuration for tiling mode
drm/sun4i: frontend: Add and use helper for checking tiling support
drm/sun4i: layer: Add tiled modifier support and helper
drm/sun4i: drv: Allow framebuffer modifiers in mode config
drm/sun4i: frontend: Add A20-specific device-tree compatible and
quirks

drivers/gpu/drm/drm_fourcc.c | 184 +++++++++++
drivers/gpu/drm/sun4i/sun4i_backend.c | 109 ++++++-
drivers/gpu/drm/sun4i/sun4i_backend.h | 3 +
drivers/gpu/drm/sun4i/sun4i_drv.c | 102 +++++-
drivers/gpu/drm/sun4i/sun4i_frontend.c | 415 ++++++++++++++++++++++---
drivers/gpu/drm/sun4i/sun4i_frontend.h | 50 ++-
drivers/gpu/drm/sun4i/sun4i_layer.c | 41 ++-
include/drm/drm_fourcc.h | 126 ++++++++
include/uapi/drm/drm_fourcc.h | 16 +
include/uapi/drm/sun4i_drm.h | 42 +++
10 files changed, 1029 insertions(+), 59 deletions(-)
create mode 100644 include/uapi/drm/sun4i_drm.h

--
2.19.1

\
 
 \ /
  Last update: 2018-11-23 10:27    [W:0.283 / U:0.080 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site