lkml.org 
[lkml]   [2018]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/17] soc: ti: pruss: export pruss_intc_configure/unconfigure APIs
Date
The PRU remoteproc driver will need to configure the
Interrupt controller based on the application specific
interrupt map.

Export pruss_intc_configure() and pruss_intc_unconfigure()
to linux/pruss.h

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/soc/ti/pruss.h | 21 -------------------
include/linux/pruss.h | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 56 insertions(+), 21 deletions(-)

diff --git a/drivers/soc/ti/pruss.h b/drivers/soc/ti/pruss.h
index 45de1be..ce3f96a 100644
--- a/drivers/soc/ti/pruss.h
+++ b/drivers/soc/ti/pruss.h
@@ -9,12 +9,6 @@
#ifndef _PRUSS_H_
#define _PRUSS_H_

-/* maximum number of system events */
-#define MAX_PRU_SYS_EVENTS 64
-
-/* maximum number of interrupt channels */
-#define MAX_PRU_CHANNELS 10
-
/* minimum starting host interrupt number for MPU */
#define MIN_PRU_HOST_INT 2

@@ -22,16 +16,6 @@
#define MAX_PRU_HOST_INT 10

/**
- * struct pruss_intc_config - INTC configuration info
- * @sysev_to_ch: system events to channel mapping information
- * @ch_to_host: interrupt channel to host interrupt information
- */
-struct pruss_intc_config {
- s8 sysev_to_ch[MAX_PRU_SYS_EVENTS];
- s8 ch_to_host[MAX_PRU_CHANNELS];
-};
-
-/**
* struct pruss - PRUSS parent structure
* @dev: pruss device pointer
* @cfg: regmap for config region
@@ -49,9 +33,4 @@ struct pruss {
struct mutex lock; /* PRU resource lock */
};

-int pruss_intc_configure(struct pruss *pruss,
- struct pruss_intc_config *intc_config);
-int pruss_intc_unconfigure(struct pruss *pruss,
- struct pruss_intc_config *intc_config);
-
#endif /* _PRUSS_H_ */
diff --git a/include/linux/pruss.h b/include/linux/pruss.h
index 3ed175a..c797fb1 100644
--- a/include/linux/pruss.h
+++ b/include/linux/pruss.h
@@ -118,6 +118,22 @@ struct pruss_mem_region {
size_t size;
};

+/* maximum number of system events */
+#define MAX_PRU_SYS_EVENTS 64
+
+/* maximum number of interrupt channels */
+#define MAX_PRU_CHANNELS 10
+
+/**
+ * struct pruss_intc_config - INTC configuration info
+ * @sysev_to_ch: system events to channel mapping information
+ * @ch_to_host: interrupt channel to host interrupt information
+ */
+struct pruss_intc_config {
+ s8 sysev_to_ch[MAX_PRU_SYS_EVENTS];
+ s8 ch_to_host[MAX_PRU_CHANNELS];
+};
+
struct pruss;

#if IS_ENABLED(CONFIG_TI_PRUSS)
@@ -136,6 +152,34 @@ int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val);
int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
unsigned int mask, unsigned int val);

+/**
+ * pruss_intc_configure() - configure the PRUSS INTC
+ * @pruss: the pruss instance
+ * @intc_config: PRU core-specific INTC configuration
+ *
+ * Configures the PRUSS INTC with the provided configuration from
+ * a PRU core. Any existing event to channel mappings or channel to
+ * host interrupt mappings are checked to make sure there are no
+ * conflicting configuration between both the PRU cores. The function
+ * is intended to be used only by the PRU remoteproc driver.
+ *
+ * Returns 0 on success, or a suitable error code otherwise
+ */
+int pruss_intc_configure(struct pruss *pruss,
+ struct pruss_intc_config *intc_config);
+
+/**
+ * pruss_intc_unconfigure() - unconfigure the PRUSS INTC
+ * @pruss: the pruss instance
+ * @intc_config: PRU core specific INTC configuration
+ *
+ * Undo whatever was done in pruss_intc_configure() for a PRU core.
+ * It should be sufficient to just mark the resources free in the
+ * global map and disable the host interrupts and sysevents.
+ */
+int pruss_intc_unconfigure(struct pruss *pruss,
+ struct pruss_intc_config *intc_config);
+
#else

static inline struct pruss *pruss_get(struct rproc *rproc)
@@ -174,6 +218,18 @@ int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
return -ENOTSUPP;
}

+int pruss_intc_configure(struct pruss *pruss,
+ struct pruss_intc_config *intc_config)
+{
+ return -ENOTSUPP;
+}
+
+int pruss_intc_unconfigure(struct pruss *pruss,
+ struct pruss_intc_config *intc_config)
+{
+ return -ENOTSUPP;
+}
+
#endif /* CONFIG_TI_PRUSS */

#endif /* __LINUX_PRUSS_H */
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
\
 
 \ /
  Last update: 2018-11-22 12:41    [W:0.867 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site