lkml.org 
[lkml]   [2018]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: at91: sama5d2: use the divided clock for SMC
On 20/11/2018 21:40:49+0100, Alexandre Belloni wrote:
> On 20/11/2018 19:01:32+0100, Romain Izard wrote:
> > Le mar. 20 nov. 2018 à 18:16, Alexandre Belloni
> > <alexandre.belloni@bootlin.com> a écrit :
> > >
> > > Hello Romain,
> > >
> > > On 20/11/2018 17:57:37+0100, Romain Izard wrote:
> > > > The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
> > > > different clocks for the peripherals in the SoC. The Static Memory
> > > > controller is connected to the divided master clock.
> > > >
> > > > Unfortunately, the device tree does not correctly show this and uses the
> > > > master clock directly. This clock is then used by the code for the NAND
> > > > controller to calculate the timings for the controller, and we end up with
> > > > slow NAND Flash access.
> > > >
> > > > Fix the device tree, and the performance of Flash access is improved.
> > > >
> > > > Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
> > > > ---
> > > > arch/arm/boot/dts/sama5d2.dtsi | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> > > > index 61f68e5c48e9..b405992eb601 100644
> > > > --- a/arch/arm/boot/dts/sama5d2.dtsi
> > > > +++ b/arch/arm/boot/dts/sama5d2.dtsi
> > > > @@ -308,7 +308,7 @@
> > > > 0x1 0x0 0x60000000 0x10000000
> > > > 0x2 0x0 0x70000000 0x10000000
> > > > 0x3 0x0 0x80000000 0x10000000>;
> > > > - clocks = <&mck>;
> > > > + clocks = <&h32ck>;
> > >
> > > You will have to rebase on top of at91-dt. And if I'm not mistaken, this
> > > line should be:
> > >
> > > + clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
> > >
> > > > status = "disabled";
> > > >
> > > > nand_controller: nand-controller {
> >
> > I guess you're right but this will only reach mainline in 4.21. I get slow
> > flash access with 4.19 as well...
> >
>
> Ok, this is super annoying, I'll try to get that as fixes on v4.20 and
> I'll rebase at91-dt on top of that...
>

So, I did that just now.


--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-11-21 12:01    [W:0.078 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site