Messages in this thread | | | Date | Tue, 20 Nov 2018 08:58:03 +0100 | From | Maxime Ripard <> | Subject | Re: [PATCH 0/3] arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 and LEDs |
| |
On Tue, Nov 20, 2018 at 02:53:08PM +0800, Chen-Yu Tsai wrote: > Hi, > > This small series enables USB 2.0 and LEDs on the Orange Pi Lite 2 and > Orange Pi One Plus. The two features are unrelated, but included in the > same series as the patch contexts overlap. > > Patch one adds a fixed regulator to represent the board-wide 5V rail. > While not strictly necessary, this helps define the relationship between > regulators. > > Patch two enables USB 2.0 host and OTG. Note that VBUS on both ports are > directly tied to the 5V rail, without any power switches or current > limiters. > > Patch three add device nodes for the two LEDs. These LEDs are driven > directly by the GPIO pins, without a current limiting resistor. At the > default drive strength, the LEDs are quite bright.
Applied all three patches, thanks!
Maxime
-- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com [unhandled content-type:application/pgp-signature] | |