lkml.org 
[lkml]   [2018]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] phy: core: rework phy_set_mode to accept phy mode and submode
Date
Hi Kishon, All,

Thank you for your review.
I've not added "Tested-by"/"Acked-by" tags due to code changes in v3.

As was discussed in [1] I'm posting series which introduces rework of
phy_set_mode to accept phy mode and submode. I've dropped TI specific patches as
this change is pretty big by itself.

Patch 1 is cumulative change which refactors PHY framework code to
support dual level PHYs mode configuration - PHY mode and PHY submode. It
extends .set_mode() callback to support additional parameter "int submode"
and converts all corresponding PHY drivers to support new .set_mode()
callback declaration.
The new extended PHY API
int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode)
is introduced to support dual level PHYs mode configuration and existing
phy_set_mode() API is converted to macros, so PHY framework consumers do
not need to be changed (~21 matches).

Patches 2-4: Add new PHY's mode to be used by Ethernet PHY interface drivers or
multipurpose PHYs like serdes and convert ocelot-serdes and mvebu-cp110-comphy
PHY drivers to use recently introduced PHY_MODE_ETHERNET and phy_set_mode_ext().

Patch 5 - removes unused, ethernet specific phy modes from enum phy_mode.

Testing:
- series tested on TI am335x/am437x/am5(dra7) paltforms.
- other driver build tested.

changes in v3:
- mux tables for PHY ocelot-serdes driver updated to store PHY mode and submode
- mux tables for PHY mvebu-cp110-comphy driver updated to store PHY mode
and submode
changes in v2:
- marvell PHY and net drivers updated as recommended by Russell King

v2: https://lkml.org/lkml/2018/11/10/220
v1: https://lkml.org/lkml/2018/11/8/260

[1] https://lkml.org/lkml/2018/10/25/366

Grygorii Strashko (5):
phy: core: rework phy_set_mode to accept phy mode and submode
phy: core: add PHY_MODE_ETHERNET
phy: ocelot-serdes: convert to use eth phy mode and submode
phy: mvebu-cp110-comphy: convert to use eth phy mode and submode
phy: core: clean up unused ethernet specific phy modes

drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 19 +----
drivers/net/ethernet/mscc/ocelot.c | 9 +--
drivers/phy/allwinner/phy-sun4i-usb.c | 3 +-
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +-
drivers/phy/amlogic/phy-meson-gxl-usb3.c | 5 +-
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 93 ++++++++++++++-----------
drivers/phy/mediatek/phy-mtk-tphy.c | 2 +-
drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +-
drivers/phy/mscc/phy-ocelot-serdes.c | 24 +++++--
drivers/phy/phy-core.c | 6 +-
drivers/phy/qualcomm/phy-qcom-qmp.c | 3 +-
drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 3 +-
drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 3 +-
drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 +-
drivers/phy/ti/phy-da8xx-usb.c | 3 +-
drivers/phy/ti/phy-tusb1210.c | 2 +-
include/linux/phy/phy.h | 18 +++--
18 files changed, 111 insertions(+), 95 deletions(-)

--
2.10.5

\
 
 \ /
  Last update: 2018-11-20 02:26    [W:1.631 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site