lkml.org 
[lkml]   [2018]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: TSC to Mono-raw Drift
Miroslav,

On Fri, 2 Nov 2018, Miroslav Lichvar wrote:
> On Thu, Nov 01, 2018 at 06:41:00PM +0100, Thomas Gleixner wrote:
> > On Wed, 24 Oct 2018, Miroslav Lichvar wrote:
> > > The error is too large to be corrected by stepping on clock updates.
> > > For a typical TSC frequency we have multiplier in the range of few
> > > millions, so that's a frequency error of up to few hundred ppb. In the
> > > old days when the clock was updated 1000 times per second that would
> > > be hidden in the resolution of the clock, but now with tickless
> > > kernels those steps would be very noticeable.
>
> > That only happens when the system was completely idle for a second and in
> > that case it's a non issue because the clock is updated before it's
> > used. So nothing will be able to observe the time jumping forward by a few
> > or even a few hundreds of nanoseconds.
>
> That's great news (to me). I think we should do the same with the
> mono/real clock. A periodic 4ns step would be better than a slew
> correcting tens or hundreds of nanoseconds. This would be a
> significant improvement in accuracy on idle systems, in theory
> identical to running with nohz=off.
>
> Maybe I am missing some important detail, but I think we can just drop
> the +1 mult adjustment and step on each update by the (truncated)
> amount that has accumulated in the NTP error register. With the
> changes that have been made earlier this year the clock should never
> be ahead, so the step would always be forward.

That sounds reasonable.

> > For the regular case, where CPUs are
> > busy and the update happens 100/250/1000 times per second the jump forward
> > will not be noticable at all.
>
> I think a 4ns jump at 100 Hz might be noticeable with a good reference
> clock and large number of measurements, but so would be the current +1
> mult adjustment.

Indeed.

Thanks,

tglx

\
 
 \ /
  Last update: 2018-11-02 12:28    [W:0.230 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site