lkml.org 
[lkml]   [2018]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 16/17] power: supply: olpc_battery: Avoid using platform_info
Date
This wouldn't work on the DT-based ARM platform. Let's read the EC version
directly from the EC driver instead.

This makes the driver no longer x86 specific.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>

---
Changes since v1:
- Use uint8_t instead of unsigned char [1] for ecver

drivers/power/supply/Kconfig | 2 +-
drivers/power/supply/olpc_battery.c | 35 +++++++++++++++++++++--------
2 files changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index f27cf0709500..dd7ae1431098 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -151,7 +151,7 @@ config BATTERY_PMU

config BATTERY_OLPC
tristate "One Laptop Per Child battery"
- depends on X86_32 && OLPC
+ depends on OLPC
help
Say Y to enable support for the battery on the OLPC laptop.

diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
index 4433eb10a23d..ec5dfb8fcb8a 100644
--- a/drivers/power/supply/olpc_battery.c
+++ b/drivers/power/supply/olpc_battery.c
@@ -20,8 +20,6 @@
#include <linux/jiffies.h>
#include <linux/sched.h>
#include <linux/olpc-ec.h>
-#include <asm/olpc.h>
-

#define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */
#define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */
@@ -57,6 +55,7 @@ struct olpc_battery_data {
struct power_supply *olpc_ac;
struct power_supply *olpc_bat;
char bat_serial[17];
+ int new_proto;
};

/*********************************************************************
@@ -100,7 +99,7 @@ static const struct power_supply_desc olpc_ac_desc = {
static int olpc_bat_get_status(struct olpc_battery_data *data,
union power_supply_propval *val, uint8_t ec_byte)
{
- if (olpc_platform_info.ecver > 0x44) {
+ if (data->new_proto) {
if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ec_byte & BAT_STAT_DISCHARGING)
@@ -608,14 +607,32 @@ static int olpc_battery_probe(struct platform_device *pdev)
struct power_supply_config psy_cfg = {};
struct olpc_battery_data *data;
uint8_t status;
+ uint8_t ecver;
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, data);
+
+ /* See if the EC is already there and get the EC revision */
+ ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ecver, 1);
+ if (ret) {
+ if (ret == -ENODEV)
+ return -EPROBE_DEFER;
+ return ret;
+ }

- /*
- * We've seen a number of EC protocol changes; this driver requires
- * the latest EC protocol, supported by 0x44 and above.
- */
- if (olpc_platform_info.ecver < 0x44) {
+ if (ecver > 0x44) {
+ /* XO 1 or 1.5 with a new EC firmware. */
+ data->new_proto = 1;
+ } else if (ecver < 0x44) {
+ /*
+ * We've seen a number of EC protocol changes; this driver
+ * requires the latest EC protocol, supported by 0x44 and above.
+ */
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
- "battery driver.\n", olpc_platform_info.ecver);
+ "battery driver.\n", ecver);
return -ENXIO;
}

--
2.19.1
\
 
 \ /
  Last update: 2018-11-16 17:25    [W:0.207 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site