lkml.org 
[lkml]   [2018]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/9] drm/msm: add headless gpu device (for imx5)
From
Date
On 11/14/2018 05:47 PM, Jordan Crouse wrote:
> Thanks for the patch. Perhaps a small blurb here for the commit log to let
> folks know what your intent was.
>

I will add an explanation. The intent is clear to me from the commit
message, but perhaps not for everyone.

> On Wed, Nov 14, 2018 at 05:24:12PM -0500, Jonathan Marek wrote:
>> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
>> ---
>> drivers/gpu/drm/msm/Kconfig | 4 ++--
>> drivers/gpu/drm/msm/msm_debugfs.c | 2 +-
>> drivers/gpu/drm/msm/msm_drv.c | 15 +++++++++++----
>> include/linux/qcom_scm.h | 3 +++
>> 4 files changed, 17 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
>> index 843a9d40c05e..cf549f1ed403 100644
>> --- a/drivers/gpu/drm/msm/Kconfig
>> +++ b/drivers/gpu/drm/msm/Kconfig
>> @@ -2,7 +2,7 @@
>> config DRM_MSM
>> tristate "MSM DRM"
>> depends on DRM
>> - depends on ARCH_QCOM || (ARM && COMPILE_TEST)
>> + depends on ARCH_QCOM || SOC_IMX5 || (ARM && COMPILE_TEST)
>> depends on OF && COMMON_CLK
>> depends on MMU
>> select QCOM_MDT_LOADER if ARCH_QCOM
>> @@ -11,7 +11,7 @@ config DRM_MSM
>> select DRM_PANEL
>> select SHMEM
>> select TMPFS
>> - select QCOM_SCM
>> + select QCOM_SCM if ARCH_QCOM
>> select WANT_DEV_COREDUMP
>> select SND_SOC_HDMI_CODEC if SND_SOC
>> select SYNC_FILE
>> diff --git a/drivers/gpu/drm/msm/msm_debugfs.c b/drivers/gpu/drm/msm/msm_debugfs.c
>> index f0da0d3c8a80..1ca99ca356a4 100644
>> --- a/drivers/gpu/drm/msm/msm_debugfs.c
>> +++ b/drivers/gpu/drm/msm/msm_debugfs.c
>> @@ -235,7 +235,7 @@ int msm_debugfs_init(struct drm_minor *minor)
>> debugfs_create_file("gpu", S_IRUSR, minor->debugfs_root,
>> dev, &msm_gpu_fops);
>>
>> - if (priv->kms->funcs->debugfs_init) {
>> + if (priv->kms && priv->kms->funcs->debugfs_init) {
>> ret = priv->kms->funcs->debugfs_init(priv->kms, minor);
>> if (ret)
>> return ret;
>> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
>> index 9f219e02f3c7..a10cc0298d38 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.c
>> +++ b/drivers/gpu/drm/msm/msm_drv.c
>> @@ -344,6 +344,7 @@ static int msm_drm_uninit(struct device *dev)
>> return 0;
>> }
>>
>> +#define KMS_HEADLESS 1
>> #define KMS_MDP4 4
>> #define KMS_MDP5 5
>> #define KMS_DPU 3
>> @@ -495,6 +496,9 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
>> msm_gem_shrinker_init(ddev);
>>
>> switch (get_mdp_ver(pdev)) {
>> + case KMS_HEADLESS:
>> + priv->kms = kms = NULL;
>
> I don't think you need to set priv->kms, it should come in as NULL. I would
> normally say that you should set kms to NULL when it is declared, but I kind of
> like pointing it out to the user.
>

It comes as NULL, but initializing it here matches the other cases in
the switch (at the cost of 12 characters).

>> + break;
>> case KMS_MDP4:
>> kms = mdp4_kms_init(ddev);
>> priv->kms = kms;
>> @@ -633,7 +637,7 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
>> drm_mode_config_reset(ddev);
>>
>> #ifdef CONFIG_DRM_FBDEV_EMULATION
>> - if (fbdev)
>> + if (kms && fbdev)
>> priv->fbdev = msm_fbdev_init(ddev);
>> #endif
>>
>> @@ -1315,9 +1319,11 @@ static int msm_pdev_probe(struct platform_device *pdev)
>> struct component_match *match = NULL;
>> int ret;
>>
>> - ret = add_display_components(&pdev->dev, &match);
>> - if (ret)
>> - return ret;
>> + if (get_mdp_ver(pdev) != KMS_HEADLESS) {
>> + ret = add_display_components(&pdev->dev, &match);
>> + if (ret)
>> + return ret;
>> + }
>>
>> ret = add_gpu_components(&pdev->dev, &match);
>> if (ret)
>> @@ -1342,6 +1348,7 @@ static int msm_pdev_remove(struct platform_device *pdev)
>> }
>>
>> static const struct of_device_id dt_match[] = {
>> + { .compatible = "qcom,adreno-headless", .data = (void *)KMS_HEADLESS },
>> { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 },
>> { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
>> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
>> diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
>> index 06996ad4f2bc..1637385bcc17 100644
>> --- a/include/linux/qcom_scm.h
>> +++ b/include/linux/qcom_scm.h
>> @@ -67,6 +67,9 @@ extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
>> extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
>> extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
>> #else
>> +
>> +#include <linux/errno.h>
>> +
>
> This looks like a separate patch, albeit a useful one.
>

Yes, that isn't part of this patch. Oops.

>> static inline
>> int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
>> {
>
> Jordan
>

Jonathan

\
 
 \ /
  Last update: 2018-11-15 00:11    [W:0.118 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site