lkml.org 
[lkml]   [2018]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] Add new features for SC27XX fuel gauge driver
Date
This patch set adds some new features for SC27XX fuel gauge driver.

1. Read calibration data from eFuse device to calibrate fuel gauge.
2. Add low voltage alarm to adjust the battery capacity in lower
voltage stage.
3. Add power management interfaces
4. Save last optimized battery capacity to be used as the initial
battery capacity if system is not first power-on.

Baolin Wang (2):
dt-bindings: power: supply: Add nvmem properties to calibrate FGU
power: supply: sc27xx: Add fuel gauge calibration

Yuanjiang Yu (3):
power: supply: sc27xx: Add fuel gauge low voltage alarm
power: supply: sc27xx: Add suspend/resume interfaces
power: supply: sc27xx: Save last battery capacity

.../devicetree/bindings/power/supply/sc27xx-fg.txt | 4 +
drivers/power/supply/sc27xx_fuel_gauge.c | 453 +++++++++++++++++++-
2 files changed, 444 insertions(+), 13 deletions(-)

--
1.7.9.5

\
 
 \ /
  Last update: 2018-11-14 10:09    [W:0.124 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site