Messages in this thread | | | From | Paul Moore <> | Date | Tue, 13 Nov 2018 18:34:18 -0500 | Subject | Re: [PATCH 1/2] riscv: add audit support |
| |
On Tue, Nov 13, 2018 at 5:07 AM Palmer Dabbelt <palmer@sifive.com> wrote: > On Mon, 29 Oct 2018 03:48:53 PDT (-0700), david.abdurachmanov@gmail.com wrote: > > On RISC-V (riscv) audit is supported through generic lib/audit.c. > > The patch adds required arch specific definitions. > > > > Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> > > --- > > arch/riscv/Kconfig | 1 + > > arch/riscv/include/asm/ptrace.h | 5 +++++ > > arch/riscv/include/asm/syscall.h | 10 ++++++++++ > > arch/riscv/include/asm/thread_info.h | 6 ++++++ > > arch/riscv/kernel/entry.S | 4 ++-- > > include/uapi/linux/audit.h | 2 ++ > > 6 files changed, 26 insertions(+), 2 deletions(-) > > > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig > > index a344980287a5..8e6d404a4ed0 100644 > > --- a/arch/riscv/Kconfig > > +++ b/arch/riscv/Kconfig > > @@ -28,6 +28,7 @@ config RISCV > > select GENERIC_STRNLEN_USER > > select GENERIC_SMP_IDLE_THREAD > > select GENERIC_ATOMIC64 if !64BIT || !RISCV_ISA_A > > + select HAVE_ARCH_AUDITSYSCALL > > select HAVE_MEMBLOCK > > select HAVE_MEMBLOCK_NODE_MAP > > select HAVE_DMA_CONTIGUOUS > > diff --git a/arch/riscv/include/asm/ptrace.h b/arch/riscv/include/asm/ptrace.h > > index 2c5df945d43c..62c5e9d35596 100644 > > --- a/arch/riscv/include/asm/ptrace.h > > +++ b/arch/riscv/include/asm/ptrace.h > > @@ -113,6 +113,11 @@ static inline void frame_pointer_set(struct pt_regs *regs, > > SET_FP(regs, val); > > } > > > > +static inline unsigned long regs_return_value(struct pt_regs *regs) > > +{ > > + return regs->a0; > > +} > > + > > #endif /* __ASSEMBLY__ */ > > > > #endif /* _ASM_RISCV_PTRACE_H */ > > diff --git a/arch/riscv/include/asm/syscall.h b/arch/riscv/include/asm/syscall.h > > index 8d25f8904c00..bba3da6ef157 100644 > > --- a/arch/riscv/include/asm/syscall.h > > +++ b/arch/riscv/include/asm/syscall.h > > @@ -18,6 +18,7 @@ > > #ifndef _ASM_RISCV_SYSCALL_H > > #define _ASM_RISCV_SYSCALL_H > > > > +#include <uapi/linux/audit.h> > > #include <linux/sched.h> > > #include <linux/err.h> > > > > @@ -99,4 +100,13 @@ static inline void syscall_set_arguments(struct task_struct *task, > > memcpy(®s->a1 + i * sizeof(regs->a1), args, n * sizeof(regs->a0)); > > } > > > > +static inline int syscall_get_arch(void) > > +{ > > +#ifdef CONFIG_64BIT > > + return AUDIT_ARCH_RISCV64; > > +#else > > + return AUDIT_ARCH_RISCV32; > > +#endif > > +} > > + > > #endif /* _ASM_RISCV_SYSCALL_H */ > > diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h > > index f8fa1cd2dad9..1c9cc8389928 100644 > > --- a/arch/riscv/include/asm/thread_info.h > > +++ b/arch/riscv/include/asm/thread_info.h > > @@ -80,13 +80,19 @@ struct thread_info { > > #define TIF_RESTORE_SIGMASK 4 /* restore signal mask in do_signal() */ > > #define TIF_MEMDIE 5 /* is terminating due to OOM killer */ > > #define TIF_SYSCALL_TRACEPOINT 6 /* syscall tracepoint instrumentation */ > > +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing */ > > > > #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) > > #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) > > #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) > > #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) > > +#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) > > +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) > > > > #define _TIF_WORK_MASK \ > > (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NEED_RESCHED) > > > > +#define _TIF_SYSCALL_WORK \ > > + (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_AUDIT) > > + > > #endif /* _ASM_RISCV_THREAD_INFO_H */ > > diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S > > index fa2c08e3c05e..2a6c2e7aaff3 100644 > > --- a/arch/riscv/kernel/entry.S > > +++ b/arch/riscv/kernel/entry.S > > @@ -202,7 +202,7 @@ handle_syscall: > > REG_S s2, PT_SEPC(sp) > > /* Trace syscalls, but only if requested by the user. */ > > REG_L t0, TASK_TI_FLAGS(tp) > > - andi t0, t0, _TIF_SYSCALL_TRACE > > + andi t0, t0, _TIF_SYSCALL_WORK > > bnez t0, handle_syscall_trace_enter > > check_syscall_nr: > > /* Check to make sure we don't jump to a bogus syscall number. */ > > @@ -222,7 +222,7 @@ ret_from_syscall: > > REG_S a0, PT_A0(sp) > > /* Trace syscalls, but only if requested by the user. */ > > REG_L t0, TASK_TI_FLAGS(tp) > > - andi t0, t0, _TIF_SYSCALL_TRACE > > + andi t0, t0, _TIF_SYSCALL_WORK > > bnez t0, handle_syscall_trace_exit > > > > ret_from_exception: > > diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h > > index 818ae690ab79..d0e037a96a7b 100644 > > --- a/include/uapi/linux/audit.h > > +++ b/include/uapi/linux/audit.h > > @@ -399,6 +399,8 @@ enum { > > /* do not define AUDIT_ARCH_PPCLE since it is not supported by audit */ > > #define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT) > > #define AUDIT_ARCH_PPC64LE (EM_PPC64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) > > +#define AUDIT_ARCH_RISCV32 (EM_RISCV|__AUDIT_ARCH_LE) > > +#define AUDIT_ARCH_RISCV64 (EM_RISCV|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) > > #define AUDIT_ARCH_S390 (EM_S390) > > #define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT) > > #define AUDIT_ARCH_SH (EM_SH) > > I can't seem to figure out how to dig the rest of the thread out of my inbox > (I'm in an airport), so I'm just replying here. > > I've added this to next-audit, which will soon filter into for-next. I'm not > sure if this is 100% settled, but I can't find any issues with it so I think > it's best to get this out for testing.
If you RISCV guys are happy, and it is passing the audit-testsuite (which I believe it is based on some brief discussions with David on Freenode), then I think it is okay from my point of view.
-- paul moore www.paul-moore.com
| |