lkml.org 
[lkml]   [2018]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 17/26] dt-bindings: sun6i-dsi: Add VCC-DSI supply property
Date
Most of the Allwinner MIPI DSI controllers are supply with
VCC-DSI pin. which need to supply for some of the boards to
trigger the power.

So, document the supply property so-that the required board
can eable it via device tree.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
index 9fa6e7a758ad..adc7cdf129dd 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
@@ -28,6 +28,9 @@ Required properties:
first port should be the input endpoint, usually coming from the
associated TCON.

+Optional properties:
+ - vcc-dsi-supply: the VCC-DSI power supply of the DSI encoder
+
Any MIPI-DSI device attached to this should be described according to
the bindings defined in ../mipi-dsi-bus.txt

--
2.18.0.321.gffc6fa0e3
\
 
 \ /
  Last update: 2018-11-13 12:19    [W:0.284 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site