lkml.org 
[lkml]   [2018]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5] kernel/signal: Signal-based pre-coredump notification
From
Date
Hi, Folks:

Could you please take care of this patch [PATCH 5]?

Thanks. -- Enke

On 10/29/18 3:31 PM, Enke Chen wrote:
> For simplicity and consistency, this patch provides an implementation
> for signal-based fault notification prior to the coredump of a child
> process. A new prctl command, PR_SET_PREDUMP_SIG, is defined that can
> be used by an application to express its interest and to specify the
> signal for such a notification.
>
> Changes to prctl(2):
>
> PR_SET_PREDUMP_SIG (since Linux 4.20.x)
> Set the child pre-coredump signal of the calling process to
> arg2 (either a signal value in the range 1..maxsig, or 0 to
> clear). This is the signal that the calling process will get
> prior to the coredump of a child process. This value is
> cleared across execve(2), or for the child of a fork(2).
>
> PR_GET_PREDUMP_SIG (since Linux 4.20.x)
> Return the current value of the child pre-coredump signal,
> in the location pointed to by (int *) arg2.
>
> Background:
>
> As the coredump of a process may take time, in certain time-sensitive
> applications it is necessary for a parent process (e.g., a process
> manager) to be notified of a child's imminent death before the coredump
> so that the parent process can act sooner, such as re-spawning an
> application process, or initiating a control-plane fail-over.
>
> One application is BFD. The early fault notification is a critical
> component for maintaining BFD sessions (with a timeout value of
> 50 msec or 100 msec) across a control-plane failure.
>
> Currently there are two ways for a parent process to be notified of a
> child process's state change. One is to use the POSIX signal, and
> another is to use the kernel connector module. The specific events and
> actions are summarized as follows:
>
> Process Event POSIX Signal Connector-based
> ----------------------------------------------------------------------
> ptrace_attach() do_notify_parent_cldstop() proc_ptrace_connector()
> SIGCHLD / CLD_STOPPED
>
> ptrace_detach() do_notify_parent_cldstop() proc_ptrace_connector()
> SIGCHLD / CLD_CONTINUED
>
> pre_coredump/ N/A proc_coredump_connector()
> get_signal()
>
> post_coredump/ do_notify_parent() proc_exit_connector()
> do_exit() SIGCHLD / exit_signal
> ----------------------------------------------------------------------
>
> As shown in the table, the signal-based pre-coredump notification is not
> currently available. In some cases using a connector-based notification
> can be quite complicated (e.g., when a process manager is written in shell
> scripts and thus is subject to certain inherent limitations), and a
> signal-based notification would be simpler and better suited.
>
> Signed-off-by: Enke Chen <enkechen@cisco.com>
> Reviewed-by: Oleg Nesterov <oleg@redhat.com>
> ---
> v4 -> v5:
> Addressed review comments from Oleg Nesterov:
> o use rcu_read_lock instead.
> o revert back to notify the real_parent.
>
> fs/coredump.c | 23 +++++++++++++++++++++++
> fs/exec.c | 3 +++
> include/linux/sched/signal.h | 3 +++
> include/uapi/linux/prctl.h | 4 ++++
> kernel/sys.c | 13 +++++++++++++
> 5 files changed, 46 insertions(+)
>
> diff --git a/fs/coredump.c b/fs/coredump.c
> index e42e17e..740b1bb 100644
> --- a/fs/coredump.c
> +++ b/fs/coredump.c
> @@ -536,6 +536,24 @@ static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
> return err;
> }
>
> +/*
> + * While do_notify_parent() notifies the parent of a child's death post
> + * its coredump, this function lets the parent (if so desired) know about
> + * the imminent death of a child just prior to its coredump.
> + */
> +static void do_notify_parent_predump(void)
> +{
> + struct task_struct *parent;
> + int sig;
> +
> + rcu_read_lock();
> + parent = rcu_dereference(current->real_parent);
> + sig = parent->signal->predump_signal;
> + if (sig != 0)
> + do_send_sig_info(sig, SEND_SIG_NOINFO, parent, PIDTYPE_TGID);
> + rcu_read_unlock();
> +}
> +
> void do_coredump(const kernel_siginfo_t *siginfo)
> {
> struct core_state core_state;
> @@ -590,6 +608,11 @@ void do_coredump(const kernel_siginfo_t *siginfo)
> if (retval < 0)
> goto fail_creds;
>
> + /*
> + * Send the pre-coredump signal to the parent if requested.
> + */
> + do_notify_parent_predump();
> +
> old_cred = override_creds(cred);
>
> ispipe = format_corename(&cn, &cprm);
> diff --git a/fs/exec.c b/fs/exec.c
> index fc281b7..7714da7 100644
> --- a/fs/exec.c
> +++ b/fs/exec.c
> @@ -1181,6 +1181,9 @@ static int de_thread(struct task_struct *tsk)
> /* we have changed execution domain */
> tsk->exit_signal = SIGCHLD;
>
> + /* Clear the pre-coredump signal before loading a new binary */
> + sig->predump_signal = 0;
> +
> #ifdef CONFIG_POSIX_TIMERS
> exit_itimers(sig);
> flush_itimer_signals();
> diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h
> index 13789d1..728ef68 100644
> --- a/include/linux/sched/signal.h
> +++ b/include/linux/sched/signal.h
> @@ -112,6 +112,9 @@ struct signal_struct {
> int group_stop_count;
> unsigned int flags; /* see SIGNAL_* flags below */
>
> + /* The signal sent prior to a child's coredump */
> + int predump_signal;
> +
> /*
> * PR_SET_CHILD_SUBREAPER marks a process, like a service
> * manager, to re-parent orphan (double-forking) child processes
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index c0d7ea0..79f0a8a 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -219,4 +219,8 @@ struct prctl_mm_map {
> # define PR_SPEC_DISABLE (1UL << 2)
> # define PR_SPEC_FORCE_DISABLE (1UL << 3)
>
> +/* Whether to receive signal prior to child's coredump */
> +#define PR_SET_PREDUMP_SIG 54
> +#define PR_GET_PREDUMP_SIG 55
> +
> #endif /* _LINUX_PRCTL_H */
> diff --git a/kernel/sys.c b/kernel/sys.c
> index 123bd73..39aa3b8 100644
> --- a/kernel/sys.c
> +++ b/kernel/sys.c
> @@ -2476,6 +2476,19 @@ int __weak arch_prctl_spec_ctrl_set(struct task_struct *t, unsigned long which,
> return -EINVAL;
> error = arch_prctl_spec_ctrl_set(me, arg2, arg3);
> break;
> + case PR_SET_PREDUMP_SIG:
> + if (arg3 || arg4 || arg5)
> + return -EINVAL;
> + if (!valid_signal((int)arg2))
> + return -EINVAL;
> + me->signal->predump_signal = (int)arg2;
> + break;
> + case PR_GET_PREDUMP_SIG:
> + if (arg3 || arg4 || arg5)
> + return -EINVAL;
> + error = put_user(me->signal->predump_signal,
> + (int __user *)arg2);
> + break;
> default:
> error = -EINVAL;
> break;
>

\
 
 \ /
  Last update: 2018-11-13 00:22    [W:0.284 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site