lkml.org 
[lkml]   [2018]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Letux-kernel] [PATCH RFC] bluetooth: add uart h4 devices via serdev/devicetree
On Mon, 12 Nov 2018 18:17:38 -0600
Rob Herring <robh@kernel.org> wrote:

> On Mon, Nov 12, 2018 at 4:27 PM Sebastian Reichel
> <sebastian.reichel@collabora.com> wrote:
> >
> > Hi,
> >
> > On Mon, Nov 12, 2018 at 10:19:02PM +0100, H. Nikolaus Schaller wrote:
> > > > Am 12.11.2018 um 21:59 schrieb Andreas Kemnade <andreas@kemnade.info>:
> > > > On Sun, 11 Nov 2018 03:46:48 +0100
> > > > Sebastian Reichel <sebastian.reichel@collabora.com> wrote:
> > > >> On Sun, Nov 11, 2018 at 12:20:34AM +0100, Andreas Kemnade wrote:
> > > >>> This is a first try to be able to use h4 devices specified in
> > > >>> the devicetree, so you do not need to call hciattach and
> > > >>> it can be automatically probed.
> > > >>>
> > > >>> Of course, proper devicetree bindings documentation is
> > > >>> missing. And also you would extend that by regulator/
> > > >>> enable gpio settings.
> > > >>>
> > > >>> But before proceeding further it should be checked if the
> > > >>> general way of doing things is right.
> > > >>>
> > > >>> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> > > >>> ---
> > > >>
> > > >> Patch looks good to me, just one note
> > > >>
> > > > I found one thing myself:
> > > > Shouldn't we have a generic compatible string like "generic-h4".
> > > > ehci-platform.c has for example:
> > > > { .compatible = "generic-ehci", },
> > >
> > > There might be differences in h4 compatible devices (e.g. default
> > > baud rate) so that I would not bet there a "generic-h4" suffices
> > > in the long run.
>
> It will not because that doesn't define clocks, resets, gpios,
> supplies, etc. and the interactions of all those.
>
well, we need a simple supply being on when the device is on.
Nothing more.

> > My suggestion is to use this in DT:
> >
> > compatible = "wi2wi,w2cbw003-bluetooth", "<something generic>";
> >
That would be my slight preference here.

> > The driver can start with supporting just the generic compatible
> > string. If somebody finds some incompatible differences, the driver
> > can add a custom handler for the wi2wi chip without breaking DT
> > ABI.
>
> Any idea how many H4 devices there are? Somehow I doubt there are that
> many to be unmanageable.
>
Well, many devices are h4 devices with some more or less important
vendor-specific commands. Well, "hciattach any" uses simple h4 protocol.

those firmware download commands and they have their own drivers.
Most devices I had used bluetooth uart from the command line with, were
simple enough. The other question is whether those devices will run a
modern kernel.

No strong opinion here.

Regards,
Andreas
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-11-13 17:03    [W:0.118 / U:1.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site