lkml.org 
[lkml]   [2018]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v4 1/2] staging: iio: ad7780: update voltage on read
Date
On Sun, 2018-11-11 at 14:30 +0000, Jonathan Cameron wrote:
> On Tue, 6 Nov 2018 09:24:44 +0000
> "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote:
>
> > On Mon, 2018-11-05 at 17:14 -0200, Renato Lui Geh wrote:
> > > The ad7780 driver previously did not read the correct device output,
> > > as
> > > it read an outdated value set at initialization. It now updates its
> > > voltage on read.
> > >
>
> Applied to the togreg branch of iio.git and pushed out as testing for
> the autobuilders to check it. I'm not that fussed about pushing this
> one as a fix, as most of the time these things are on fixed regulators
> anyway, but it is nice to do it right.
>
> > Looks good from my side.
>
> Ack?

Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

>
> Much preferred if you are willing to give a formal acknowledgement.
>
> Thanks,
>
> Jonathan
>
>
> >
> > Alex
> >
> > > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
> > > ---
> > > Changes in v3:
> > > - removed initialization (int voltage_uv = 0)
> > > - returns error when voltage_uv is null
> > > Changes in v4:
> > > - returns error when voltage_uv is negative
> > >
> > > drivers/staging/iio/adc/ad7780.c | 6 +++++-
> > > 1 file changed, 5 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/staging/iio/adc/ad7780.c
> > > b/drivers/staging/iio/adc/ad7780.c
> > > index b67412db0318..c7cb05cedbbc 100644
> > > --- a/drivers/staging/iio/adc/ad7780.c
> > > +++ b/drivers/staging/iio/adc/ad7780.c
> > > @@ -87,12 +87,16 @@ static int ad7780_read_raw(struct iio_dev
> > > *indio_dev,
> > > long m)
> > > {
> > > struct ad7780_state *st = iio_priv(indio_dev);
> > > + int voltage_uv;
> > >
> > > switch (m) {
> > > case IIO_CHAN_INFO_RAW:
> > > return ad_sigma_delta_single_conversion(indio_dev, chan,
> > > val);
> > > case IIO_CHAN_INFO_SCALE:
> > > - *val = st->int_vref_mv * st->gain;
> > > + voltage_uv = regulator_get_voltage(st->reg);
> > > + if (voltage_uv < 0)
> > > + return voltage_uv;
> > > + *val = (voltage_uv / 1000) * st->gain;
> > > *val2 = chan->scan_type.realbits - 1;
> > > return IIO_VAL_FRACTIONAL_LOG2;
> > > case IIO_CHAN_INFO_OFFSET:
>
>
\
 
 \ /
  Last update: 2018-11-12 08:58    [W:0.072 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site