lkml.org 
[lkml]   [2018]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface
On Sun, 11 Nov 2018 12:24:05 +0000
Jonathan Cameron <jic23@kernel.org> wrote:

> On Fri, 9 Nov 2018 13:05:17 +0530
> Nishad Kamdar <nishadkamdar@gmail.com> wrote:
>
> > Use the gpiod interface for rdwr_pin, convert_pin and busy_pin
> > instead of the deprecated old non-descriptor interface.
> >
> > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> Applied to the togreg branch of iio.git and pushed out as testing
> for the autobuilders to play with it.
Actually no it isn't, because I applied the previous version back in
October. Please avoid resending patches that have already been applied.
It gets very confusing!

Jonathan


>
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/staging/iio/adc/ad7816.c | 80 ++++++++++++++------------------
> > 1 file changed, 34 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c
> > index bf76a8620bdb..12c4e0ab4713 100644
> > --- a/drivers/staging/iio/adc/ad7816.c
> > +++ b/drivers/staging/iio/adc/ad7816.c
> > @@ -7,7 +7,7 @@
> > */
> >
> > #include <linux/interrupt.h>
> > -#include <linux/gpio.h>
> > +#include <linux/gpio/consumer.h>
> > #include <linux/device.h>
> > #include <linux/kernel.h>
> > #include <linux/slab.h>
> > @@ -44,9 +44,9 @@
> >
> > struct ad7816_chip_info {
> > struct spi_device *spi_dev;
> > - u16 rdwr_pin;
> > - u16 convert_pin;
> > - u16 busy_pin;
> > + struct gpio_desc *rdwr_pin;
> > + struct gpio_desc *convert_pin;
> > + struct gpio_desc *busy_pin;
> > u8 oti_data[AD7816_CS_MAX + 1];
> > u8 channel_id; /* 0 always be temperature */
> > u8 mode;
> > @@ -61,28 +61,28 @@ static int ad7816_spi_read(struct ad7816_chip_info *chip, u16 *data)
> > int ret = 0;
> > __be16 buf;
> >
> > - gpio_set_value(chip->rdwr_pin, 1);
> > - gpio_set_value(chip->rdwr_pin, 0);
> > + gpiod_set_value(chip->rdwr_pin, 1);
> > + gpiod_set_value(chip->rdwr_pin, 0);
> > ret = spi_write(spi_dev, &chip->channel_id, sizeof(chip->channel_id));
> > if (ret < 0) {
> > dev_err(&spi_dev->dev, "SPI channel setting error\n");
> > return ret;
> > }
> > - gpio_set_value(chip->rdwr_pin, 1);
> > + gpiod_set_value(chip->rdwr_pin, 1);
> >
> > if (chip->mode == AD7816_PD) { /* operating mode 2 */
> > - gpio_set_value(chip->convert_pin, 1);
> > - gpio_set_value(chip->convert_pin, 0);
> > + gpiod_set_value(chip->convert_pin, 1);
> > + gpiod_set_value(chip->convert_pin, 0);
> > } else { /* operating mode 1 */
> > - gpio_set_value(chip->convert_pin, 0);
> > - gpio_set_value(chip->convert_pin, 1);
> > + gpiod_set_value(chip->convert_pin, 0);
> > + gpiod_set_value(chip->convert_pin, 1);
> > }
> >
> > - while (gpio_get_value(chip->busy_pin))
> > + while (gpiod_get_value(chip->busy_pin))
> > cpu_relax();
> >
> > - gpio_set_value(chip->rdwr_pin, 0);
> > - gpio_set_value(chip->rdwr_pin, 1);
> > + gpiod_set_value(chip->rdwr_pin, 0);
> > + gpiod_set_value(chip->rdwr_pin, 1);
> > ret = spi_read(spi_dev, &buf, sizeof(*data));
> > if (ret < 0) {
> > dev_err(&spi_dev->dev, "SPI data read error\n");
> > @@ -99,8 +99,8 @@ static int ad7816_spi_write(struct ad7816_chip_info *chip, u8 data)
> > struct spi_device *spi_dev = chip->spi_dev;
> > int ret = 0;
> >
> > - gpio_set_value(chip->rdwr_pin, 1);
> > - gpio_set_value(chip->rdwr_pin, 0);
> > + gpiod_set_value(chip->rdwr_pin, 1);
> > + gpiod_set_value(chip->rdwr_pin, 0);
> > ret = spi_write(spi_dev, &data, sizeof(data));
> > if (ret < 0)
> > dev_err(&spi_dev->dev, "SPI oti data write error\n");
> > @@ -129,10 +129,10 @@ static ssize_t ad7816_store_mode(struct device *dev,
> > struct ad7816_chip_info *chip = iio_priv(indio_dev);
> >
> > if (strcmp(buf, "full")) {
> > - gpio_set_value(chip->rdwr_pin, 1);
> > + gpiod_set_value(chip->rdwr_pin, 1);
> > chip->mode = AD7816_FULL;
> > } else {
> > - gpio_set_value(chip->rdwr_pin, 0);
> > + gpiod_set_value(chip->rdwr_pin, 0);
> > chip->mode = AD7816_PD;
> > }
> >
> > @@ -345,15 +345,9 @@ static int ad7816_probe(struct spi_device *spi_dev)
> > {
> > struct ad7816_chip_info *chip;
> > struct iio_dev *indio_dev;
> > - unsigned short *pins = dev_get_platdata(&spi_dev->dev);
> > int ret = 0;
> > int i;
> >
> > - if (!pins) {
> > - dev_err(&spi_dev->dev, "No necessary GPIO platform data.\n");
> > - return -EINVAL;
> > - }
> > -
> > indio_dev = devm_iio_device_alloc(&spi_dev->dev, sizeof(*chip));
> > if (!indio_dev)
> > return -ENOMEM;
> > @@ -364,34 +358,28 @@ static int ad7816_probe(struct spi_device *spi_dev)
> > chip->spi_dev = spi_dev;
> > for (i = 0; i <= AD7816_CS_MAX; i++)
> > chip->oti_data[i] = 203;
> > - chip->rdwr_pin = pins[0];
> > - chip->convert_pin = pins[1];
> > - chip->busy_pin = pins[2];
> > -
> > - ret = devm_gpio_request(&spi_dev->dev, chip->rdwr_pin,
> > - spi_get_device_id(spi_dev)->name);
> > - if (ret) {
> > - dev_err(&spi_dev->dev, "Fail to request rdwr gpio PIN %d.\n",
> > - chip->rdwr_pin);
> > +
> > + chip->rdwr_pin = devm_gpiod_get(&spi_dev->dev, "rdwr", GPIOD_IN);
> > + if (IS_ERR(chip->rdwr_pin)) {
> > + ret = PTR_ERR(chip->rdwr_pin);
> > + dev_err(&spi_dev->dev, "Failed to request rdwr GPIO: %d\n",
> > + ret);
> > return ret;
> > }
> > - gpio_direction_input(chip->rdwr_pin);
> > - ret = devm_gpio_request(&spi_dev->dev, chip->convert_pin,
> > - spi_get_device_id(spi_dev)->name);
> > - if (ret) {
> > - dev_err(&spi_dev->dev, "Fail to request convert gpio PIN %d.\n",
> > - chip->convert_pin);
> > + chip->convert_pin = devm_gpiod_get(&spi_dev->dev, "convert", GPIOD_IN);
> > + if (IS_ERR(chip->convert_pin)) {
> > + ret = PTR_ERR(chip->convert_pin);
> > + dev_err(&spi_dev->dev, "Failed to request convert GPIO: %d\n",
> > + ret);
> > return ret;
> > }
> > - gpio_direction_input(chip->convert_pin);
> > - ret = devm_gpio_request(&spi_dev->dev, chip->busy_pin,
> > - spi_get_device_id(spi_dev)->name);
> > - if (ret) {
> > - dev_err(&spi_dev->dev, "Fail to request busy gpio PIN %d.\n",
> > - chip->busy_pin);
> > + chip->busy_pin = devm_gpiod_get(&spi_dev->dev, "busy", GPIOD_IN);
> > + if (IS_ERR(chip->busy_pin)) {
> > + ret = PTR_ERR(chip->busy_pin);
> > + dev_err(&spi_dev->dev, "Failed to request busy GPIO: %d\n",
> > + ret);
> > return ret;
> > }
> > - gpio_direction_input(chip->busy_pin);
> >
> > indio_dev->name = spi_get_device_id(spi_dev)->name;
> > indio_dev->dev.parent = &spi_dev->dev;
>

\
 
 \ /
  Last update: 2018-11-11 13:32    [W:0.122 / U:22.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site