lkml.org 
[lkml]   [2018]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/6] nfc: pn532_uart: Add NXP PN532 to devicetree docs
Date
Add a simple binding doc for the pn532.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
Changes in v4:
- Add documentation about reg property in case of i2c

Changes in v3:
- seperate binding doc instead of entry in trivial-devices.txt

.../devicetree/bindings/nfc/pn532.txt | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nfc/pn532.txt

diff --git a/Documentation/devicetree/bindings/nfc/pn532.txt b/Documentation/devicetree/bindings/nfc/pn532.txt
new file mode 100644
index 000000000000..d5aaa588073d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nfc/pn532.txt
@@ -0,0 +1,33 @@
+NXP PN532 NFC Chip
+
+Required properties:
+- compatible: Should be
+ - "nxp,pn532" Place a node with this inside the devicetree node of the bus
+ where the NFC chip is connected to.
+ Currently the kernel has phy bindings for uart and i2c.
+ - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding.
+ - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding.
+
+Required properties if connected on i2c:
+- reg: for the i2c bus address. This is fixed at 0x48 for the PN532.
+
+Example uart:
+
+uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+
+ pn532: nfc {
+ compatible = "nxp,pn532";
+ };
+};
+
+Example i2c:
+
+i2c1: i2c@0 {
+ compatible = "ti,omap3-i2c";
+
+ pn532: nfc {
+ compatible = "nxp,pn532";
+ reg = <0x48>;
+ };
+};
--
2.19.1
\
 
 \ /
  Last update: 2018-11-01 11:04    [W:0.126 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site