lkml.org 
[lkml]   [2018]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH AUTOSEL 4.19 092/146] scsi: esp_scsi: Track residual for PIO transfers
    Date
    From: Finn Thain <fthain@telegraphics.com.au>

    [ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]

    If a target disconnects during a PIO data transfer the command may fail
    when the target reconnects:

    scsi host1: DMA length is zero!
    scsi host1: cur adr[04380000] len[00000000]

    The scsi bus is then reset. This happens because the residual reached
    zero before the transfer was completed.

    The usual residual calculation relies on the Transfer Count registers.
    That works for DMA transfers but not for PIO transfers. Fix the problem
    by storing the PIO transfer residual and using that to correctly
    calculate bytes_sent.

    Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
    Tested-by: Stan Johnson <userm57@yahoo.com>
    Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
    Tested-by: Michael Schmitz <schmitzmic@gmail.com>
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/scsi/esp_scsi.c | 1 +
    drivers/scsi/esp_scsi.h | 2 ++
    drivers/scsi/mac_esp.c | 2 ++
    3 files changed, 5 insertions(+)

    diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
    index c3fc34b9964d..9e5d3f7d29ae 100644
    --- a/drivers/scsi/esp_scsi.c
    +++ b/drivers/scsi/esp_scsi.c
    @@ -1338,6 +1338,7 @@ static int esp_data_bytes_sent(struct esp *esp, struct esp_cmd_entry *ent,

    bytes_sent = esp->data_dma_len;
    bytes_sent -= ecount;
    + bytes_sent -= esp->send_cmd_residual;

    /*
    * The am53c974 has a DMA 'pecularity'. The doc states:
    diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h
    index 8163dca2071b..a77772777a30 100644
    --- a/drivers/scsi/esp_scsi.h
    +++ b/drivers/scsi/esp_scsi.h
    @@ -540,6 +540,8 @@ struct esp {

    void *dma;
    int dmarev;
    +
    + u32 send_cmd_residual;
    };

    /* A front-end driver for the ESP chip should do the following in
    diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
    index eb551f3cc471..71879f2207e0 100644
    --- a/drivers/scsi/mac_esp.c
    +++ b/drivers/scsi/mac_esp.c
    @@ -427,6 +427,8 @@ static void mac_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
    scsi_esp_cmd(esp, ESP_CMD_TI);
    }
    }
    +
    + esp->send_cmd_residual = esp_count;
    }

    static int mac_esp_irq_pending(struct esp *esp)
    --
    2.17.1
    \
     
     \ /
      Last update: 2018-11-01 00:47    [W:4.120 / U:0.088 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site